Jump to content

pbxnsip CPU Limit


Sub-Zero

Recommended Posts

We are running pbxnsip on a Intel Core 2 duo 3.0ghz 2m cache 2gb ram, the pbx can only run on one of the cpu's. Is there a setting that we can change so that both cores can be used? Or any suggestions how to improve the pbx performance on the box?

 

Our error sent by pbx as follows,

 

CPU meter shows 76, which is over the threshold of 75. Therefore, a new call has been rejected

Link to comment
Share on other sites

We are running pbxnsip on a Intel Core 2 duo 3.0ghz 2m cache 2gb ram, the pbx can only run on one of the cpu's. Is there a setting that we can change so that both cores can be used? Or any suggestions how to improve the pbx performance on the box?

 

Running the process on several cores is not possible. We tried, but this resulted in jitter in the 50 ms area which is not okay. Seems like the OS needs to put the whole process on hold (MMU) when creating a new thread that affects another core.

 

What you could do is run two instances of the PBX in seperate folders and cores. This is like running two seperate PBX. The disadvantage is that you also need to maintain two PBX. If you are operating a server farm with many PBX and domains anyway, that should be easy. However if you just have one domain, this will be quite a big step.

 

After all, it is a PBX, not a class 4 switch.

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...