Jump to content

FAX PROBLEM - T38 - SIP - GW and PBX


forzageta

Recommended Posts

Hello, I'm testing T38 for my service provider.

 

My information technology is: I have a PBX MD110 connected to a GW (Cisco or Teldat) , I have to configure the GW with dial-peers voice pots and sip for routing the inbound calls for the PBX and the inbound calls of the NGN Network.

I´m testing fax T38 now, and i send faxes from my PBX to NGN Network by SIP correctly but i don´t receive faxes to the fax of the PBX from NGN Network

 

I have two PCs with software called VentaFax & Voice which simulate two FAXs

 

I have captured with Wireshark:

 

TrazaFAX is a bad trace, from fax out of my PBX to fax of my PBX. The fax call falls because i think the fax out my PBX doesn´t transmit anything

 

I´m in Europe , i changed the codec to G711alaw (although the trace is with G711ulaw) , and i also changed the PCs from one extreme to the other just in case the problem was the modem of the PC

 

Can anybody help me with the call trace?

 

Thanks

post-3212-1287743849_thumb.png

Link to comment
Share on other sites

My Fax send an image in a call through my PBX , this call goes to my Gw through primary ISDN, the GW has a SIP SERVER (10.10.75.80) and signals against a SIP SERVER of the NGN Network (194.179.10.3) and routes the call with T.38. In this sense , the call is OK and i receive the FAX in the other side but when the call is originated by the fax of the NGN Network, i see the call in my GW and i see that two faxes comunicate but however the ouside fax don´t transmit the image. Monday, i can send you the good trace in sense PBX- outside

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...