Arryxyz Posted July 20, 2011 Report Share Posted July 20, 2011 Hi everybody. I'm trying to configure PnP in a test environment. SnomONEfree Snom320 (reset to factory defaults) No DHCP Option66 I can set up manually IP address on the phone. I access to web interface and set setting url. Everything is OK. I'd like to make installation as easy as possible. Is it possibile to setup the "update_server" (the option passed normally through DHCP Option66) through ActionURL (eg: http://phone_ip/set.php?update_server=1.1.1.1)? Thanks Arryxyz Quote Link to comment Share on other sites More sharing options...
pbx support Posted July 20, 2011 Report Share Posted July 20, 2011 There are few settings that you can change remotely on the phone. If this is a phone specific question & if you post this on the phone forum (forum.snom.com), you might get a better answer. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted July 21, 2011 Report Share Posted July 21, 2011 I would just put the IP address of the server into the settings_server field of the phone. This is pretty much like option 66. As far as I remember this is in the webinterface in advanced, then on the very right tab. I also remember that you can hold the pound key down while booting (but after it asks to interrupt the boot process), then you can enter the IP address also from the phone keyboard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.