Dunwood Posted August 20, 2012 Report Share Posted August 20, 2012 We have Snom 821 phones on most desks and I want to configure a button to monitor the Service Flag. I have a server doing some provisioning and in the config file I have added... <fkey idx="3" context="2" label="Night Mode" perm="">dest <sip:987@192.168.2.135;user=phone></fkey> Really the context needs to be set to "0" or "active" since not all of the phones have the identities in the same order, some phone have multiple ID's etc... but no matter how hard I try this comes up as "Not Found" when I push the button. If I configure the phone manually through the web interface on the function keys page it works fine, and the line generated in the XML settings looks just like the one above. It simply doesn't work when the setting is pushed from the provisioning server. Quote Link to comment Share on other sites More sharing options...
Vodia support Posted August 22, 2012 Report Share Posted August 22, 2012 Is this configured on the snomONE? it should work if provisioned by the system using the button profiles. Quote Link to comment Share on other sites More sharing options...
Dunwood Posted August 28, 2012 Author Report Share Posted August 28, 2012 Is this configured on the snomONE? it should work if provisioned by the system using the button profiles. It is not. We have a separate HTTP server delivering config files to the phones as XML files. Quote Link to comment Share on other sites More sharing options...
Vodia support Posted August 28, 2012 Report Share Posted August 28, 2012 If you're not doing snomONE Provisioning, Please post your findings at http://forum.snom.com Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted August 29, 2012 Report Share Posted August 29, 2012 <fkey idx="3" context="2" label="Night Mode" perm="">dest <sip:987@192.168.2.135;user=phone></fkey> Could be a problem with the XML encoding? Remember that < must be encoded like "<" and > as ">", so it would be <fkey idx="3" context="2" label="Night Mode" perm="">dest <sip:987@192.168.2.135;user=phone></fkey> Quote Link to comment Share on other sites More sharing options...
Dunwood Posted August 29, 2012 Author Report Share Posted August 29, 2012 Could be a problem with the XML encoding? Remember that < must be encoded like "<" and > as ">", so it would be <fkey idx="3" context="2" label="Night Mode" perm="">dest <sip:987@192.168.2.135;user=phone></fkey> Boom, there goes the problem, and now I feel like a noob again Cheers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.