Great Office - Hummig KG Posted November 7, 2012 Report Share Posted November 7, 2012 Hello, the first thing we've tested in V5 is the Fax-Support, but we don't have success handling incoming faxes. We've set up a simple test PBX. One Trunk with all calls coming in are going to ext. 123 with Mailbox enabled. No other accounts in this PBX. Fax call comes in, Mailbox starts with greeting and then after the first fax beep, greeting is stopped and... nothing happens. This is the logfile, maybe somebody could help us: [9] 2012/11/07 07:43:47: Resolve 34: aaaa udp 213.148.xxx.yyy 5060 [9] 2012/11/07 07:43:47: Resolve 34: a udp 213.148.xxx.yyy 5060 [9] 2012/11/07 07:43:47: Resolve 34: udp 213.148.xxx.yyy 5060 [7] 2012/11/07 07:43:47: Set packet length to 20 [6] 2012/11/07 07:43:47: Call-leg 6: Sending RTP for SD6gmn801-6bfce09b79485f0b4aef2dd42aab850e-l65h813 to 213.148.xxx.yyy:46268, codec not set yet [8] 2012/11/07 07:43:47: Incoming call: Request URI sip:089123456@qsc.de, To is <sip:089123456@qsc.de;user=phone> [8] 2012/11/07 07:43:47: Set the To domain based on To user 123@pbx.company.com [8] 2012/11/07 07:43:47: Play audio_en/mb_you_have_reached.wav audio_en/mb_leave_msg_after_tone.wav audio_moh/mb_beep.wav, caching false [7] 2012/11/07 07:43:47: Call port 6: set_codecs for SD6gmn801-6bfce09b79485f0b4aef2dd42aab850e-l65h813 codecs "", codec_preference count 6 [8] 2012/11/07 07:43:47: call port 6: state code from 0 to 200 [7] 2012/11/07 07:43:47: Set packet length to 20 [9] 2012/11/07 07:43:47: Call port 6: update_codecs for SD6gmn801-6bfce09b79485f0b4aef2dd42aab850e-l65h813: adding codec pcmu/8000 to available list [9] 2012/11/07 07:43:47: Call port 6: update_codecs for SD6gmn801-6bfce09b79485f0b4aef2dd42aab850e-l65h813: adding codec pcma/8000 to available list [9] 2012/11/07 07:43:47: Call port 6: update_codecs for SD6gmn801-6bfce09b79485f0b4aef2dd42aab850e-l65h813: Other side does not support codec g722/8000 [9] 2012/11/07 07:43:47: Call port 6: update_codecs for SD6gmn801-6bfce09b79485f0b4aef2dd42aab850e-l65h813: Other side does not support codec g726-32/8000 [9] 2012/11/07 07:43:47: Call port 6: update_codecs for SD6gmn801-6bfce09b79485f0b4aef2dd42aab850e-l65h813: Other side does not support codec gsm/8000 [9] 2012/11/07 07:43:47: Call port 6: update_codecs for SD6gmn801-6bfce09b79485f0b4aef2dd42aab850e-l65h813: codec_preference size 6, available codecs size 3 [6] 2012/11/07 07:43:47: Call-leg 6: Codec pcmu/8000 is chosen for call id SD6gmn801-6bfce09b79485f0b4aef2dd42aab850e-l65h813 [9] 2012/11/07 07:43:47: Resolve 35: aaaa udp 213.148.xxx.yyy 5060 [9] 2012/11/07 07:43:47: Resolve 35: a udp 213.148.xxx.yyy 5060 [9] 2012/11/07 07:43:47: Resolve 35: udp 213.148.xxx.yyy 5060 [6] 2012/11/07 07:43:47: Call-leg 6: Codec pcmu/8000 is chosen for call id SD6gmn801-6bfce09b79485f0b4aef2dd42aab850e-l65h813 [5] 2012/11/07 07:43:47: set codec: codec pcmu/8000 is set to call-leg 6 [5] 2012/11/07 07:43:47: Last message repeated 2 times [6] 2012/11/07 07:43:47: Received DTMF F, call type mailbox [8] 2012/11/07 07:43:47: call port 6: state code from 200 to 200 Of course, SIP-Provider supports T.38. Quote Link to comment Share on other sites More sharing options...
hosted Posted November 10, 2012 Report Share Posted November 10, 2012 I am running 5.01a and I see the pbx establish the t38. but it does not email the fax getting closer! Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted November 11, 2012 Report Share Posted November 11, 2012 Do you get the email when you leave a voice message? (is the email working in general)? Quote Link to comment Share on other sites More sharing options...
hosted Posted November 14, 2012 Report Share Posted November 14, 2012 Do you get the email when you leave a voice message? (is the email working in general)? yes we received .wav files. but no faxing [6] 2012/11/13 19:08:43: Received DTMF F, call type mailbox [8] 2012/11/13 19:08:43: Received FAX CNG tone [8] 2012/11/13 19:08:43: Play audio_moh/bi_ced.wav, caching false [8] 2012/11/13 19:08:43: call port 21: state code from 200 to 200 [6] 2012/11/13 19:08:43: Could not read file audio_moh\bi_ced.wav (error code ERROR_FILE_NOT_FOUND) [9] 2012/11/13 19:08:43: UDP(IPv4): Opening socket on 0.0.0.0:61288 [9] 2012/11/13 19:08:43: UDP(IPv6): Opening socket on [::]:61288 [9] 2012/11/13 19:08:43: Resolve 13668: url sip:2.2.2.129:5060;transport=udp [9] 2012/11/13 19:08:43: Resolve 13668: a udp 2.2.2.129 5060 [9] 2012/11/13 19:08:43: Resolve 13668: udp 2.2.2.129 5060 [5] 2012/11/13 19:08:43: SIP Tx udp:2.2.2.129:5060: INVITE sip:2.2.2.129:5060;transport=udp SIP/2.0 Via: SIP/2.0/UDP 2.2.2.225:5060;branch=z9hG4bK-54d8a37697b1da56f7127e382f2c44a0;rport From: "8012179009" <sip:8012179009@2.2.2.225>;tag=1a98783bfa To: <sip:000000@2.2.2.129:5060>;tag=1909021447074609 Call-ID: 1bd6409b36w8o1uj8b@2.2.2.129 CSeq: 11812 INVITE Max-Forwards: 70 Contact: <sip:8012179009@2.2.2.225:5060;transport=udp> Supported: 100rel, replaces, norefersub Allow-Events: refer Allow: INVITE, ACK, CANCEL, BYE, REFER, PRACK, INFO, UPDATE Accept: application/sdp User-Agent: snomONE/5.0.1a Content-Type: application/sdp Content-Length: 217 v=0 o=- 24338 24339 IN IP4 2.2.2.225 s=- c=IN IP4 2.2.2.225 t=0 0 m=image 61288 udptl t38 a=T38FaxVersion:0 a=T38MaxBitRate:14400 a=T38FaxRateManagement:transferredTCF a=T38FaxUdpEC:t38UDPRedundancy [6] 2012/11/13 19:08:43: Receiving T.38 from 3.3.3.229:7168 [5] 2012/11/13 19:08:43: SIP Rx udp:2.2.2.129:5060: SIP/2.0 200 OK CSeq: 11812 INVITE Via: SIP/2.0/UDP 2.2.2.225:5060;branch=z9hG4bK-54d8a37697b1da56f7127e382f2c44a0;rport From: "8012179009" <sip:8012179009@2.2.2.225>;tag=1a98783bfa Call-ID: 1bd6409b36w8o1uj8b@2.2.2.129 To: <sip:000000@2.2.2.129:5060>;tag=1909021447074609 Contact: <sip:2.2.2.129:5060;transport=udp> Allow: INVITE, ACK, OPTIONS, BYE, CANCEL, REGISTER, INFO, NOTIFY, MESSAGE, SUBSCRIBE, REFER, PUBLISH Content-Type: application/sdp Content-Length: 304 v=0 o=Sonus_UAC 18898 18339 IN IP4 67.108.1.1 s=SIP Media Capabilities c=IN IP4 3.3.3.229 t=0 0 m=image 7168 udptl t38 a=T38FaxVersion:0 a=T38MaxBitRate:14400 a=T38FaxRateManagement:transferredTCF a=T38FaxMaxBuffer:262 a=T38FaxMaxDatagram:176 a=T38FaxUdpEC:t38UDPRedundancy a=sendrecv [7] 2012/11/13 19:08:43: Call 1bd6409b36w8o1uj8b@2.2.2.129: Clear last INVITE [9] 2012/11/13 19:08:43: Resolve 13669: url sip:2.2.2.129:5060;transport=udp [9] 2012/11/13 19:08:43: Resolve 13669: a udp 2.2.2.129 5060 [9] 2012/11/13 19:08:43: Resolve 13669: udp 2.2.2.129 5060 [5] 2012/11/13 19:08:43: SIP Tx udp:2.2.2.129:5060: ACK sip:2.2.2.129:5060;transport=udp SIP/2.0 Via: SIP/2.0/UDP 2.2.2.225:5060;branch=z9hG4bK-3d6ce5f42e7756b27c975641586e0deb;rport From: "8012179009" <sip:8012179009@2.2.2.225>;tag=1a98783bfa To: <sip:000000@2.2.2.129:5060>;tag=1909021447074609 Call-ID: 1bd6409b36w8o1uj8b@2.2.2.129 CSeq: 11812 ACK Max-Forwards: 70 Contact: <sip:8012179009@2.2.2.225:5060;transport=udp> Content-Length: 0 [7] 2012/11/13 19:08:43: Determine pass-through mode after receiving response [1] 2012/11/13 19:08:43: Received response for primary call [5] 2012/11/13 19:09:28: SIP Rx udp:2.2.2.129:5060: BYE sip:8012179009@2.2.2.225:5060;transport=udp SIP/2.0 CSeq: 3 BYE Via: SIP/2.0/UDP 2.2.2.129:5060;branch=z9hG4bK0919481253069481447120718 From: <sip:000000@2.2.2.129:5060>;tag=1909021447074609 Call-ID: 1bd6409b36w8o1uj8b@2.2.2.129 To: "8012179009" <sip:8012179009@2.2.2.225>;tag=1a98783bfa Contact: <sip:2.2.2.129:5060;transport=udp> Content-Length: 0 Max-Forwards: 70 Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted November 14, 2012 Report Share Posted November 14, 2012 Yepp, without that CED file the other FAX machine might just continue beeping. Please find it attached. It seems we also need to check the download pages! bi_ced.wav Quote Link to comment Share on other sites More sharing options...
hosted Posted November 22, 2012 Report Share Posted November 22, 2012 I upgraded to 5.0.2 and it looks like T38 established but it never establishes a baud rate. from sonus or directly from faxback it doesnt work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.