Jump to content

Version 5.0.9

Vodia PBX

By Vodia PBX
in Announcements

 Share

Recommended Posts

Vodia PBX Grand Master

Vodia PBX

Posted
Posted

For those who like to stay with the latest and greatest version, we have released the version 5.0.9 It addresses a few problems that we found with 5.0.8. Also it added more features to the web-based console, so that now calls can be terminated, started and transferred. Also it should be possible to see who is waiting in the ACD. As usual, the release notes can be found on http://wiki.snomone.com/index.php?title=Release_5.0. MacOS will follow tomorrow, but Centos32/64, Debian32/64, Windows32/64, ARM are available now.

Link to comment
Share on other sites
metwest Newbie

metwest

Posted
Posted

5.09 provisioning broken .... spent 2 1/2 hours trying to provision 4 new handsets up to a new system. Went back to 5.08 and provisioned fine.

 

I am using manual provisioning as the system and handsets I am setting up are on 2 different sites over a VPN (In the 870 handsets I enter the direct IP address of the Snom to get its provisioning file )

 

I have not tried any of the new features as of yet but I do have it up and running on our office system. (handsets are already provisioned so It was not a hassle)

Link to comment
Share on other sites
metwest Newbie

metwest

Posted
Posted

Regarding provisioning, the key question is if any modifications were made to the provisioning templates. Maybe they are in the way.

 

The only file changed is the snom3xx_phone.xml file with a couple of simple variations such as US date format off, missed calls off and an altered springboard.

 

I change this on all my installs with 870 handsets and have never had any issues until 5.09.

Link to comment
Share on other sites
Chappo Newbie

Chappo

Posted
Posted

Can confirm the issues with provisioning.

 

2013/05/02 15:24:55: Received SUBSCRIBE for plug and play. SIP multicast support is set to handle plug and play.

[5] 2013/05/02 15:27:05: Did not write snom_redirect.xml to file system because there is no user associated with this file

[5] 2013/05/02 15:27:05: Alert(2, 0)

[5] 2013/05/02 15:27:05: Did not write snom_821.xml to file system because there is no user associated with this file

[5] 2013/05/02 15:27:05: Alert(2, 0)

[5] 2013/05/02 15:27:06: Did not write snom_3xx_fw.xml to file system because there is no user associated with this file

[5] 2013/05/02 15:27:06: Alert(2, 0)

[5] 2013/05/02 15:27:07: Last message repeated 3 times

[5] 2013/05/02 15:27:07: Did not write snom_web_lang.xml to file system because there is no user associated with this file

[5] 2013/05/02 15:27:07: Alert(2, 0)

[5] 2013/05/02 15:27:07: Did not write snom_gui_lang.xml to file system because there is no user associated with this file

[5] 2013/05/02 15:27:07: Alert(2, 0)

[5] 2013/05/02 15:27:10: Did not write snom_3xx_fs.xml to file system because there is no user associated with this file

 

And the log from the phone -

 

/1/1970 00:01:21 [NOTICE] PHN: last prov successful:1; uri: >http://172.28.1.5:443/prov/prov/snom821-{mac}.htm<; default uri: >http://provisioning.snom.com/snom821/snom821.php?mac={mac}<

1/1/1970 00:01:21 [NOTICE] PHN: Fetching URL: http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm

1/1/1970 00:01:51 [ALERT ] PHN: WEBCLIENT: request http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm stopped due to no response from server for con_id:6

1/1/1970 00:01:51 [NOTICE] PHN: Config setup: return code 408; requeueing >http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm<; attempt: 1, state: 30

1/1/1970 00:01:54 [NOTICE] PHN: Fetching URL: http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm

1/1/1970 00:02:24 [ALERT ] PHN: WEBCLIENT: request http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm stopped due to no response from server for con_id:7

1/1/1970 00:02:24 [NOTICE] PHN: Config setup: return code 408; requeueing >http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm<; attempt: 2, state: 30

1/1/1970 00:02:27 [NOTICE] PHN: Fetching URL: http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm

1/1/1970 00:02:57 [ALERT ] PHN: WEBCLIENT: request http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm stopped due to no response from server for con_id:8

1/1/1970 00:02:57 [NOTICE] PHN: Config setup: return code 408; requeueing >http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm<; attempt: 3, state: 30

1/1/1970 00:03:00 [NOTICE] PHN: Fetching URL: http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm

1/1/1970 00:03:30 [ALERT ] PHN: WEBCLIENT: request http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm stopped due to no response from server for con_id:9

1/1/1970 00:03:30 [NOTICE] PHN: Config setup: return code 408; requeueing >http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm<; attempt: 4, state: 30

1/1/1970 00:03:33 [NOTICE] PHN: Fetching URL: http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm

1/1/1970 00:04:03 [ALERT ] PHN: WEBCLIENT: request http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm stopped due to no response from server for con_id:10

1/1/1970 00:04:03 [NOTICE] PHN: Config setup: return code 408; requeueing >http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm<; attempt: 5, state: 30

1/1/1970 00:04:06 [NOTICE] PHN: Fetching URL: http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm

1/1/1970 00:04:36 [ALERT ] PHN: WEBCLIENT: request http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm stopped due to no response from server for con_id:11

1/1/1970 00:04:36 [NOTICE] PHN: Config setup: return code 408; giving up on >http://172.28.1.5:443/prov/prov/snom821-00041345B328.htm<

1/1/1970 00:04:36 [NOTICE] PHN: SetProvisioningDone

1/1/1970 00:04:36 [NOTICE] PHN: Setting server prio 3, type dhcp, url: >newforma<

1/1/1970 00:04:36 [NOTICE] PHN: Fetching URL: tftp://newforma:69/snom821.htm

1/1/1970 00:04:36 [NOTICE] PHN: Config setup: return code 500; giving up on >tftp://172.28.1.5:69/snom821.htm<

1/1/1970 00:04:36 [NOTICE] PHN: SetProvisioningDone

Link to comment
Share on other sites
metwest Newbie

metwest

Posted
Posted

Hi Guys

 

Sorry I stopped posting on this because I assumed you guys are working on a fix.

 

5.08 is stable, no problems provisioning handsets.

 

5.09 tried 3 different systems, 2 new ones on networks with nothing but the Snom products and our office system. Also on the already provisioned handsets in our office with 5.09 when we reboot handsets we get cannot find provisioning server in info.

 

As stated before I enter the ip address of the Snom One System just as we always have in the handsets update settings url.

And open mac based provisioning on the snom one of the desired account.

Exact same way that works fine in 5.08 but 5.09 just flat out refuses to work. We are using 870 handsets and we use Debian 64 bit for my systems.

 

Have been sticking with 5.08 on customers systems until we get a fix. Hopefully soon so I can implement the new park callback feature our customer wanted that you guys kindly added :-)

 

Thanks.

Link to comment
Share on other sites
Chappo Newbie

Chappo

Posted
Posted

CDR email broken since 5.0.8?

 

It seems that the new format email is not working correctly? The email I receive is all random characters.

 

٥杙뚆۩z*'魏*^rm{ ٥r 뮵&z֡ڞ诊Kjx.j{^קɞm+¢{^ԭʗʗ{^۞Ɵܲ˭ʗʗ{ r˜M쭾ޗjq)ޅ蠆ݺ 螗ښ)r w뢱 ˞'ܢZ+뮺몚uاک✡y^dކרۢͭ| b螊 m۪q~

+Gz[޶' 챪⽊%v+骘w+m{ l7v;z'{-ʗٞ eӏW杮rܥyʥ4Ӎ4m$.רߥ_榫)x4"*'隶+޶+췩^~ޖ\Z+bZʺ'x&ʧۍwN?׿݊ K-ʗbZɹhrF{ ]yʫj

ب靺b櫲W--ʗ؟幺+u괱饥]x4q饲x4§m]4]b{h Z+ ܺ{^֛樭׫ѩbw ׫q饥]x4q饲x4§m

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


×
×
  • Create New...