Jeremy Isherwood Posted March 11, 2014 Report Share Posted March 11, 2014 I have mounted a 1TB usb disk to hold my recordings, and added a symbolic link to it. However how do I change where Snom stores these files as my link gets deleted on every reboot. Can I change the files locations? Thanks for looking. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted March 12, 2014 Report Share Posted March 12, 2014 Symbol link in the file system? They are permanent. The PBX has no influence on that. 1 TB is a lot. Does the system maybe perform a file system check after reboot? That would take longer I guess. Can you log in with SSH after reboot and check if you can manually mount the drive? Do other drives lets say with 200 GB work without problems? Quote Link to comment Share on other sites More sharing options...
Jeremy Isherwood Posted March 12, 2014 Author Report Share Posted March 12, 2014 Dont have aby problems mounting the drive, works fine. The issue is keeping the symbolic link after a reboot. Is it possible to just change the location within the Snom application for recordings to say "/media/usb0/recordings" instead of using a symbolic link. The problem is the memory on the SoHo is just so small. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted March 13, 2014 Report Share Posted March 13, 2014 I did a little bit of research on the search terms "linux external drive reboot symbolic lnk", This seems to be a general Linux problem, not only for the embedded Linux. But I think it is also possible to specify an absolute path for the recording location, e.g. /media/usb/recordings/$i-$d.wav Quote Link to comment Share on other sites More sharing options...
Jeremy Isherwood Posted March 13, 2014 Author Report Share Posted March 13, 2014 Yes, I think your right, thats in the settings tab right? Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted March 13, 2014 Report Share Posted March 13, 2014 It is in the admin mode, general then CDR/recordings and its name is "Record Location" Quote Link to comment Share on other sites More sharing options...
Jeremy Isherwood Posted March 13, 2014 Author Report Share Posted March 13, 2014 Yes and it works. infact I just added the "/media/usb0/" to the start of the exsisting string. thanks for your help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.