Carlos Montemayor Posted January 18, 2015 Report Share Posted January 18, 2015 Hi, Is it possible to do PnP with a Cisco SPA301 ? Has anyone already done it? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Vodia Telephone System Posted January 20, 2015 Report Share Posted January 20, 2015 Well we have tested it with SPA303 and it works. We have not explicitly tested it with SPA301 but it would be strange if it doesn't work on that too. Quote Link to comment Share on other sites More sharing options...
Carlos Montemayor Posted January 21, 2015 Author Report Share Posted January 21, 2015 Yes. I have tried some 303 with no problem, but this 301 did not play. Do we need a special text file? Quote Link to comment Share on other sites More sharing options...
Vodia Telephone System Posted January 21, 2015 Report Share Posted January 21, 2015 As far as I know, I don't think so, because we generate the files on the fly. And since it works for all kinds of SPA phones, the 301 being so close to 303 should work. Are you assigning the MAC of the phone to an extension and opening that mac for provisioning before restarting the phone? And how does the phone find the PBX, option 66 or some other way? Or are you entering the correct URL in the phone for provisioning. Just a check list in case something has been missed. Here is the relevant document, if you haven't already read it: http://vodia.com/documentation/pnp_ciscospa Also, what does the pbx log say, when set only to show provisioning logs and clear it before provisioning the phone to get a clean log of what is going on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.