Jump to content

Deutsche Telekom


HighCtenor

Recommended Posts

Hi

 

The Deutsche Telekom has offered us an upgrade to a VDSL IP-Based Anschluss. That means I have to change to a Sip Gateway or Registration. I have previously used ISDN but that has been turned off.

 

Does anyone have a template of how the Truck is set up for the Deutsche Telekom in Germany? It would help to have an example as a template for making the proper adjustments to the details.

 

 

Link to comment
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Here is the info from their help. It refers to the Router but not to the entries we need to make. When I asked about the registration I was told to not use a password but to use

tel.t-onlne.de for the domain and proxy and to use anonymous@t-online.de as the username. Below you will find the router entries:

 

2/25/2015 Welche Einstellungen sind für die IP­Telefonie mit anderen Clients nötig?
Welche Einstellungen sind für die IP­Telefonie mit anderen Clients nötig?
Die folgenden Einstellungen benötigen Sie, wenn Sie einen SIP­fähigen Software­Client oder Ihr Handy oder
den Router eines anderen Anbieters für die Internettelefonie nutzen möchten. Mit den Routern der Telekom, die für
den IP­basierten Anschluss optimiert sind, benötigen Sie diese Einstellungen nicht.
Wir bieten Ihnen dazu zwar keine detaillierten Konfigurationsanleitungen, da es eine sehr große Anzahl an Angeboten
für die Software­Clients und Hardware­Clients gibt. Dafür erhalten Sie in der folgenden Übersicht aber alle erforderlichen
Angaben, um jeden üblichen Client einzurichten.
Allgemeine Einstellungen:
SIP­ID/Benutzer: Ihre Telefonnummer
Bildschirmname (falls vorhanden): Ihre Telefonnummer
Authentifizierungsname / Benutzername: Ihre E­Mail­Adresse, z. B. ihr­name@t­online.de
Passwort: Ihr Passwort
SIP­Proxy: tel.t­online.de
Registrar: tel.t­online.de
Realm: tel.t­online.de
STUN­Server: stun.t­online.de
Outbound­Proxy: leer lassen oder ebenfalls tel.t­online.de
Bei Einsatz einer Firewall oder eines Routers sind für die IP­Telefonie folgende Portfreischaltungen erforderlich:
UDP (out): Ports 5060, 30000­31000, 40000­41000, 3478, 3479
UDP (in): Ports 5070, 5080, 30000­31000, 40000­41000
TCP (out): Port 80, 443
Hinweise:
Geben Sie die SIP­ID ohne Leerzeichen und Sonderzeichen ein (entspricht Vorwahl und Rufnummer)
Die Eingabe der SIP­ID und des Bildschirmnamens müssen übereinstimmen.
Den Benutzernamen bitte vollständig klein schreiben.
Haben Sie Ihr Passwort vergessen? In diesem Fall halten wir für Sie die Anleitung für
denWiederherstellungsprozess bereit.
Falls Sie E­Mail­Adresse und Passwort noch nicht vergeben haben, können Sie diese im Kundencentereinrichten.
Link to comment
Share on other sites

  • 3 weeks later...
  • 2 months later...

OK, this is my trunk setting for several years, but in the last few months I have a lot of "403" before I can make a call:

# Trunk 4 in domain snomone.lan.home
Name: 03012345678
Type: register
RegPass: PASSWORD
Direction: 
Disabled: false
Global: false
Display: 03012345678
RegAccount: 03012345678
RegRegistrar: tel.t-online.de
WrtcDestName: 
WrtcDestNumber: 
RegKeep: 30
RegUser: USERNAME@t-online.de
Icid: 
Require: 
OutboundProxy: tel.t-online.de
Ani: 03012345678@tel.t-online.de
DialExtension: 72
Trusted: false
AcceptRedirect: false
RfcRtp: false
BehindNat: false
RtcpXr: false
Analog: false
RtpBegin: 
RtpEnd: 
Prack: true
SendEmail: 
UseUuid: false
Ring180: false
Failover: never
HeaderRequestUri: {request-uri}
HeaderFrom: {trunk-ani}
HeaderTo: {request-uri}
HeaderPai: 
HeaderPpi: 
HeaderRpi: 
HeaderPrivacy: 12345678
HeaderRpiCharging: icid-value={icid-value};icid-generated-at={ip-address};orig-ioi={domain}
BlockCidPrefix: 
Glob: 
RequestTimeout: 
Codecs: 
CodecLock: true
Pcap: false
DtmfMode: 
Expires: 3600
Fraction: 128
Minimum: 10
FromUser: 
FromSource: ppi
Tel: true
TranscodeDtmf: false
AssociatedAddresses: 
InterOffice: false
DialPlan: 
UseEpid: false
CidUpdate: 
Ignore18xSDP: false
UserHdr: 
Diversion: 
CoBusy: 500 Line Unavailable
CoDest: 
Colines: 
DialogPermission: 

Link to comment
Share on other sites

  • 2 months later...

Back again for the 403 (Forbidden) problem:

 

It seems the main problem is given by the fact that the REGISTER is send to server 217.0.18.68 and the call INVITE to server 217.0.20.230. These both IPs are only examples for a lot of SBCs for the domain "tel.t-online.de". The registry string is not the same as the one from the invite, and there for you get forbidden message.

It helps to set the "Proxy Address" to "sip:217.0.18.68" for the trunk, but isn't really nice. Any (hidden) configuration option for that, like "insecure=port,invite" for asterisk?

Link to comment
Share on other sites

Hmm. I think according to the RFC the PBX does the right thing. But I just don't see the practical relevance. The registration process should make sure that the PBX picks a random address (if there are more than one) and then stick to it. I think this is something that we should change; I don't even think that we need a setting for that.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...