Jump to content

Felix Diaz

Members
  • Posts

    2
  • Joined

  • Last visited

Felix Diaz's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Thank you for your responses, i appreciate it. I know the HT isn't the best gateway but i am simply using it as an experiment to test interoperability of pbxnsip with OCS, when the time is right i will change this adapter for something more capable. I have done what you have suggested and now i don't seem to get any errors in the log. I cannot call the outside world however. Thing is, the adapter is plugged this way: HT-503 - Analog PBX - PSTN. If i pick up the phone connected to the HT i get a dialtone. If i press 9 (which is what i've set as the PSTN access code in the ATA) i reach my analog PBX here at work. If i press 9 again i reach the outside world. I have tested that if i dial the entire number all at once (for instance 9988536491) the call will go through, i don't have to wait for dial tones from either the HT or the analog PBX. How would i go about creating a dial plan for this? I have set a single one saying that any 8 digit call should be replaced with 99 and the 8 digits and it gets recognized in the log: [5] 2010/02/23 17:33:45: Dialplan Dial Plan: Match 88536491@192.168.230.170 to <99xxxxxxxx> on trunk PBX however the call never gets through, it just keeps ringing. Any clues? Thanks
  2. I'm pulling my hair out here. All i need (for now) is sip registration from pbxnsip to a Grandstream HT-503. Both my ATA and pbxnsip are on the same subnet. HT's IP is 192.168.230.180 and pbxnsip's is 192.168.230.170. I can register soft phones with pbxnsip. I can also call the analog phone connected to the FXS port of the gateway. HT's settings are as follows: Primary SIP Server: 192.168.230.170 Outbound Proxy: 192.168.230.170 SIP User ID: 10000 Password: 10000 SIP Transport: UDP PBXNSIP's settings are as follows: Type: SIP Registration Display Name: 10000 Account: 10000 Domain: 192.168.230.180 Username: 10000 Password: 10000 Outbound Proxy: 192.168.230.180 Everything else is at default settings. The error i get on PBXNSIP is: [2] 2010/02/22 12:35:53: Trunk status PSTN (3) changed to "405 Method Not Allowed" (Registration failed, retry after 60 seconds) [5] 2010/02/22 12:36:53: Registration on trunk 3 (PSTN) failed. Retry in 60 seconds If i reset the ATA i get: [5] 2010/02/22 12:50:30: SIP port accept from 192.168.230.180:2050 [1] 2010/02/22 12:50:30: TCP: TOS could not be set [5] 2010/02/22 12:50:53: Registration on trunk 3 (PSTN) failed. Retry in 60 seconds Thanks for your help.
×
×
  • Create New...