forzageta

I send you the good trace in the sense PBX-outside to make a comparison. I can´t capture the traffic in the PBX because it depends on other group. trazafaxOkay.zip

My Fax send an image in a call through my PBX , this call goes to my Gw through primary ISDN, the GW has a SIP SERVER (10.10.75.80) and signals against a SIP SERVER of the NGN Network (194.179.10.3) and routes the call with T.38. In this sense , the call is OK and i receive the FAX in the other side but when the call is originated by the fax of the NGN Network, i see the call in my GW and i see that two faxes comunicate but however the ouside fax don´t transmit the image. Monday, i can send you the good trace in sense PBX- outside

Thanks, I attach you the file inside .zip I have other trace of a call OK done from my PBX to the net if you need it. trazafaxfallida.zip

Hello, I'm testing T38 for my service provider. My information technology is: I have a PBX MD110 connected to a GW (Cisco or Teldat) , I have to configure the GW with dial-peers voice pots and sip for routing the inbound calls for the PBX and the inbound calls of the NGN Network. I´m testing fax T38 now, and i send faxes from my PBX to NGN Network by SIP correctly but i don´t receive faxes to the fax of the PBX from NGN Network I have two PCs with software called VentaFax & Voice which simulate two FAXs I have captured with Wireshark: TrazaFAX is a bad trace, from fax out of my PBX to fax of my PBX. The fax call falls because i think the fax out my PBX doesn´t transmit anything I´m in Europe , i changed the codec to G711alaw (although the trace is with G711ulaw) , and i also changed the PCs from one extreme to the other just in case the problem was the modem of the PC Can anybody help me with the call trace? Thanks