Jump to content
Vodia PBX forum
pbxuser911

480i CT

Recommended Posts

Has anyone got the PNP over HTTP to work with the Aastra 480i CT phone?

 

I don't believe that will work. At least the pnp.xml file does not contain anything for the 480i CT.

Share this post


Link to post
Share on other sites

here is info i received from a aastra rep, i have the admin guide and latest firmware, let me know where and i will email it.

 

 

 

SIP Firmware Upgrade

 

Go to the Aastratelecom.com web site. Navigate to: Support/Download Area/ SIP Telephones/. Find the model phone that you are upgrading. Down at the bottom of the page see "Current Software Release" and download to your PC.

 

Unzip or extract the firmware to the Pumpkin folder. Check the name of the file (it should be called "phone model.st").

 

Now go to the web interface of the phone, firmware update page. Put the ip address of the computer that has pumpkin running on it and the filename (51i.st) in the filename field and hit download firmware.

 

Watch your Pumpkin TFTP window. You should see files transferring and your phone should say 'do not unplug….' Wait for the phone to download the firmware twice, and then it will automatically reboot. This typically takes about 3-5 minutes

 

 

 

CFG files

 

Aastra phones have two cfg files aastra.cfg and "mac address".cfg. The aastra.cfg goes to all of the phones and the mac.cfg will only go to the phone with that mac address (mac address is a unique number that is assigned to a device ie. a phone or computer). In order to use cfg files you have to have an aastra.cfg file but you do not have to use a mac.cfg.

 

Authentication Settings (ie. phone number or extension and sip password) would be an example of settings that would only go to one phone so would be in the "mac address".cfg file.

Sip Network Settings (ie. registrar server and proxy server and port settings) would be an example of settings that would have to be in all phones and would be in the aastra.cfg file.

 

When creating cfg files use a text editor (Wordpad) and save file as aastra.cfg or "mac address".cfg. Keep in mind that Local.cfg (web or telephone applied settings) will always override server.cfg (config server loaded). Also mac.cfg statements will take precedence over the same statements in your aastra.cfg.

 

Create the cfg file, put it in the TFTP server folder, Go to the Configuration Server Settings page on the web interface of the phone and enter the Download Protocol and the TFTP Server IP information. When the phone is rebooted it will load the file.

 

 

Loading directory files into the phone.

 

You can load directory files just as you would with regular cfg files.

 

Add the statement below to your aastra.cfg file.

 

directory 1: companylist.csv

 

Then create your directory list as a text file (see below) and name it companylist.csv.

 

Abe, 200

Ben, 400

Chuck, 600

Dan, 800

 

Put the companylist.csv file in your TFTP server folder and reboot the phone. As the phone reboots and loads the aastra.cfg file it will also load the directory file.

There is more information regarding this in the Administrator Guide.

Share this post


Link to post
Share on other sites

Hello I need Help i have a custumer whit Aastra 480i Ct and after provisioning the phone can't find the pbxnsip ,

I used this configuration i use the web interface , please detail me whow i can get this phone work whit the pbxnsip

 

Thanks

See below

Aastra 480i CT / 9480i CT Web Configuration (SIP)

 

1. Power on unit, and allow initial boot process. After boot process has completed, hit the menu button.

 

2. The menu button is located on the top-left side of the phone. It is the button that is located directly beneath the orange button and noted by the symbol below.

 

 

 

3. Scroll to the Network option and select.

 

4. Enter the admin password “22222”

 

5. Scroll to the IP Address selection.

 

6. Gather the IP Address and browse to that address using a web browser from a machine on the same network as your Aastra phone.

 

7. Enter the following:

Username- admin

Password- 22222

 

8. From the Aastra Web GUI configuration, click Line 1 located on the left-side of the page.

 

9. Enter This Info

- Screen Name – Extension or Phone Number

- Phone Number - Extension or Phone Number

- Caller ID - Extension or Phone Number

- Authentication Name - Extension or Phone Number

- Password – Password associated to that extension in IP PBX or your Service Provider password

- Proxy Server – IP PBX IP Address or Service Provider Address

- Proxy Port – 5060

- Outbound Proxy Server - IP PBX IP Address or Service Provider Address

- Outbound Proxy Port – 5060

- Register Server - IP PBX IP Address or Service Provider Address

- Register Server Port - 5060

 

 

 

10. Scroll to the bottom of the screen and click “Save Settings”

 

11. Click reset which is located on the left side of the page.

 

 

 

12. Click “Restart”

 

13. Your phone will reboot.

 

14. Your phone will register via your IP PBX or Service Provider and be ready for calls. Notice your extension on the unit after it reboots. You may also browse back to the web GUI in the status – system information to verify if “Line 1” is registered.

Share this post


Link to post
Share on other sites

Few things you can do here -

1. Check if Aastra has any log file that could tell you something about the failure

2. You can do the wireshark trace on the PBX interface to see if you seeing packets from Aastra

3. Login to the PBX and see if Admin->Settings->Access page has blacklisted (blocked) the Aastra IP address.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×