Jump to content

Transfer from Analog Extension


halalabu

Recommended Posts

Well, there is a transfer star code (*77 for blind transfer). However, the ATA must be able to put the call on hold. Usually that can be done with a flash hook (tap the on hook key for a short time). Then you should get secondary dial tone where you can dial *77123 to transfer the call to 123.

Link to comment
Share on other sites

Well, there is a transfer star code (*77 for blind transfer). However, the ATA must be able to put the call on hold. Usually that can be done with a flash hook (tap the on hook key for a short time). Then you should get secondary dial tone where you can dial *77123 to transfer the call to 123.

 

Ahhh that works. There is a very long timeout after dialing before the PBX tries to transfer the call. I'm assuming there is a setting for how long it waits (or is it a setting in the ATA?) I'll look around. Thanks!

 

Hal

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...