Tristan Posted January 30, 2014 Report Share Posted January 30, 2014 Hi, I am trying to setup trunk to trunk routing on PABX. I am trying to design a solution where we can take a call in on trunk A and direct the call out trunk B without messing with call destination and headers. Does anyone have any ideas how to achieve this? Thanks in advance Quote Link to comment Share on other sites More sharing options...
Vodia support Posted January 30, 2014 Report Share Posted January 30, 2014 You can try this approach on trunking 2 PBX, it depends how fancy you want to get with the set up, we are currently re-vamping the documentation for version 5 but it should work just the same. http://wiki.snomone.com/index.php?title=Branch_Offices Quote Link to comment Share on other sites More sharing options...
Tristan Posted February 12, 2014 Author Report Share Posted February 12, 2014 Hi Support, Any more thought to SIP trunking? see post back in 2013: Set Up Snom One as a trunk for another PBXStarted by djanjic, Mar 12 2013 03:31 AM Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted February 12, 2014 Report Share Posted February 12, 2014 To answer the original question: Yes that's possible in 5.1.3. The feature comes from the branch office area; but at the end of the day a branch office is also nothing else than a trunk. Quote Link to comment Share on other sites More sharing options...
Tristan Posted February 12, 2014 Author Report Share Posted February 12, 2014 Great. This is a feature that solves many problems for us - can we contract you to configure and train us how? Thanks Quote Link to comment Share on other sites More sharing options...
Tristan Posted February 12, 2014 Author Report Share Posted February 12, 2014 Customer wanting to SIP trunk to us preferr to connect with username and password and not by IP is this possible? "as long as both systems either have public routable IP addresses or are on a private network with no issues with NAT" Quote Link to comment Share on other sites More sharing options...
Tristan Posted February 12, 2014 Author Report Share Posted February 12, 2014 I have just read tech note; http://wiki.snomone.com/index.php?title=Branch_Offices and I dont understand how this is a SIP tunk solution. Asking a customer on Asterisk or a 3rd party PABX to create an extension for us to register to and sending calls to that extension wont give them trunk side features that SIP trunking delivers. " Branch Office 2Create an extension that will be used by the trunk to route the calls:" Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted February 12, 2014 Report Share Posted February 12, 2014 Maybe just open a ticket and give us access to the system; then we'll do it for you. Quote Link to comment Share on other sites More sharing options...
Tristan Posted February 18, 2014 Author Report Share Posted February 18, 2014 Thanks - I have opened ticket. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.