Jump to content

McFone

Members
 View Profile  See their activity

  • Posts

    262

  • Joined

  • Last visited

 Content Type 

Posts posted by McFone

  1. CTI / TAPI with UCPlus

    in General Setup

    Posted

    Hello Community

    we did not find a solution to cover TAPI and CTI Integration out of the box with vodia and after a long time we have been able to fully support vodia for UCPlus.
    All functions DND, call forwarding and integrations are supported.

    ucplus is a powerful unified communication software suite, which allows users a high level of integration, communication and collaboration with their phone system.
    Strong integration to a huge range of different Business applications systems users information about callers quickly and efficiently significantly increasing productivity. 
    The ucplus product suite is not only cost effective but also very easy to maintain and install.

    UCPLus can be used as a multi-tendant for hosted solutions or in-house for a very good price.

    We use UCPlus for our hosted Vodia in multi-tendant operation

    Information can be found here  https://plus-software.com/uk

    For all who are also on the search this is over 😉


    thanks

  2. FAX storage

    in General Setup

    Posted

    Hi. 

    we stumbled across a problem in FAX today.

    An extension is set to FAX Only and sends FAX'e to the email, but also the FAX'e are saved and depending on the setting the mailbox limit is full and does not accept any more FAX'e.

    However, there is no switch to setting off to save the fax, the user can delete the saved FAX'e only in the domain where he normally has no access.

    Is there a way to disable the function to saving a FAX's and how can delete a user that storage fax for a extension fax only.

    thanks

     

  3. SIP Scanner Tools

    in General Setup

    Posted

    Hello community,

    who has seen more SIP scanners, please fill in so we can get a complete list of the tools of the bad guys to protect our Vodia.

    thanks

     

    sipcli

    sipvicious

    sip-scan

    sipsak

    sundayddr

    friendly-scanner

    iWar

    CSipSimple

    SIVuS

    Gulp

    sipv

    smap

    friendly-request

    VaxIPUserAgent

    VaxSIPUserAgent

    siparmyknife

    PortSIP

    pplsip

  4. Logfiles and Volumen Harddisk

    in General Setup

    Posted

    Hello,

    some PBX's are already very long in operation and we notice that the space on the hard disk becomes less,

    at which places the Vodia must be cleaned of ballast, special for logs and CDR data etc. on which directories we must setup a monitoring system to check the data size.

    Which switches in the pbx generate a high data volume on the hard disk, ok pcaps are known

    thanks

     

     

     

  7. Large DECT Installations

    in General Setup

    Posted

    Hello Community

    who has experience in large DECT installations together with the Vodia. The project will contain 240 DECT base stations with 300 DECT handsets. The positions of the DECT access points are already measured, which hardware on DECT is recommended for this which can provide something like this.

    Any idea

     

    thanks

     

  8. Doorphone internal dialplan only

    in General Setup

    Posted

    Hello,

    a customer has a door phone system on his old telephone system which is operated on an analog port.

    We want to use a Cisco SPA 122 as gateway and make the phone number DID available only for internal use.

    So that the extension number cannot be reached externally, we want to set the following in the routing of the SIPTRUNK, the "198" is the door intercom system.

    For inbound routing we wanted to use the following pattern

    !(5555555198$)!0!t!([0-9]{3}$)!\2!t!0

    Routing:

    If  incoming number 5555555198 then routing to 0 and for DID with 3 digits strip the last digits ANI if not found route all to 0

    For the dial plan we want to set the following

    https://drive.google.com/file/d/14zRPJF4E7VmpD1get6k0JfE8NPBorFyo/view?usp=drivesdk

    It is not possible to deactivate the SIPTRUNK Ecotel in the dialplan or delete it after saving the entry is back again, how to delete or deactivate the trunk from the dialplan

    For a internal dial plan it is correctly entered with the pattern * and target 198 (ANI intern)

    The door opens when you enter the code #61 during a call, the Vodia sends it this way or we have to set something.

    We can also place DTMF codes on a button to open the door at the push of a button

    thanks

     

  9. Mini PC

    in Embedded

    Posted

    Hi,

    we are looking for a mini hardware solution for the Vodia, the Vodia Mini is still available only as hardware?

    and the Mini PC's from globalscaletechnologies with the Sheevaplug still recommendable.

    thanks


     

  10. Provisioning PNP

    in General Setup

    Posted

    We have a SPA 122 / Cisco and a Grandstream HT802 both are provisioned but do not register with the vodia.

    All settings of the account will be written to the ATA via PNP and of course open for provisioning is set

    We have used the domain and IP of Vodia for provisioning.

    Any idea of what to consider in an ATA in version V60?

    The system is hosted, debian 64

    thanks

     

  11. Provisioning PNP

    in General Setup

    Posted

    Vodia V60 Hosted

    Hi, 

    we have several domains and connected a SPA 122 from Cisco to an account, which is provisioned by PNP.

    Now the customer has another solution for FAXing a FAX Server and no longer needs the ATA Gateway and we have used it in another domain for customers.

    Before we use the ATA we removed the MAC from the Domain.

    The problem is that there will be no new provisioning, we have deleted the account on other domain completely but it has no effect.

     For testing purposes, we have provisioned the SPA on a different system and PNP provisioning has worked as expected

     We think we need to delete provisioning data but where?

     thanks

     

     

     

  19. Adressbook local extensions

    in General Setup

    Posted

    Hi,

    is there a switch on domain level for the Address Book ->  Include local extensions in the phone address book: Yes / No

    The local extensions in the phonebook are usually listed first and you have to scroll at 50 extensions if it is not switched off.

    If there are many extensions in the pbx, it makes sense to switch off general and an extension want include the local extensions to switch on via its extension.

    thanks

     

  24. RTCP XR VOIP Monitoring

    in General Setup

    Posted

    Hello,

    the implementation of RTCP XR is not quite clear to us, most IP phones have implemented the standard and Vodia also seems to have an implementation.

    https://vodia.com/doc/rtcp_xr via PNP the IP Phones the vodia  switch RTCP XR on to send this parameter. 

    Since we do not know any provider at the moment support the RTCP XR so the vodia can work as remote point like this IP Phone <-  RTCP XR -> Vodia  and the phone then sends after the call data to the collector, ok this is only half way but very helpful for hosted solutions.

    For our monitoring of the IP telephones from yealink, cisco and snom we need a strong monitoring of the connections / calls.

    This solution we had found http://www.telchemy.com/sqmediator.php  looks good for us can we use this solution with vodia.

    Thanks

×
×
  • Create New...