McFone

Hi, The system does not save any contacts user portal, it is also not possible to create contacts by importing them. Version 58.3 and 58.4 thanks

right, not allow to save messageContent="{text-iso}"&test=false for "" the same thanks @Send notification for a Extension voicebox, missed call etc is is possible

Hi, ok, the service work the only problem what we have is the field not understand this http://sms.service.org/send?account=1234&password=secret&destination={to}&text={text-iso} The problem is the {} here is an error and you cannot save the field does not understand it The function is working without variables One question more normaly we plan to offer this service for a notification of voicemails from the extension this is possible thanks

Hi, thanks for the answer All phones are registered via PNP, we have already deleted the directory under generated and created a new directory for the extension. snom: we use a snom 320 With snom, the phone must be restarted for each action New / Change and Delete. A sync does not work Polycom VVX410 The same for polycom all changes to the keys must be sent to the phone via a restart. Yealink T41 With yealink it is the case that sometimes it is possible and often not, sometimes the keys are sent only after a factory reset. The yealink must be set to open provisioning again for this purpose Sometimes changes and deletions of keys can only be done via factory reset, the update of the phone after save the changes has no effect thanks

Helplinks are also changeable, black question mark thanks

Hello community, we have problems with the buttons, the behavior is the following: This behavior is the same in the user portal or domain snom: No transfer of buttons to the phone, a reboot is require after a reboot the buttons are present, a change to buttons also goes only with a reboot. Polycom: The same here, only the buttons are displayed after a reboot same for only change / delete of buttons Yealink: With the yealinks buttons are transferred to the phone but changes / delete of buttons are not transfer and yealink need a factory reset not only a reboot to take over the buttons All telephones are connected with TLS to the system and Hosted version 58.3 and we use the redirection service. We can not figure out that is wrong with the config or setup , with the behavior is not a roll out to customer possible. But we do not see our mistakes, every help or tip are welcome thanks

perfect, thanks

Hi, you have a link to the webinar to see how to customize the vodia ATTEND THE WEBINAR THIS FRIDAY AT 11:00 AM EST TO LEARN HOW TO CUSTOMIZE THE NEW VODIA PBX V58.0 GUI. GSSERVICES.WUFOO.EU/FORMS/GUI-CUST… thanks

Hi, As an SMS provider we want to use websms and the company offer via GET the sending of the SMS https://websms.de/entwickler/apis/http-simple-uri-call In the domain we can only defined a url not the account credentials from the sms gateway URL for sending text messages to cell phones: When the PBX needs to be installed, the URL provided in this setting. For more information, see Event Notifications. We need one account for the sms service per domain (Hosted Version) for billing is this possible. thanks

Hi, is a 320 snom, we have generally problems with phones and buttons we have yealink, snom and polycom, polycom for example shows only buttons after a reboot and shows a extension after a reconnect of a phone not registered online BLF status etc. Would be great if you could watch this live together via remote deskop thanks

Hi, no provision of keys on any device are possible domain extension -> Buttons and user portal. We can see under the generated folder, the relation of the button config are not stored correctly, in the config file snom_320_buttons-000413xxxx.xml are missing data. We use Version Sep 9 2017 05:45:43 Version 58.3 Maybe a configuration problem? Any idea thanks

Hi, We create button profiles in the domain and map them to the extensions, in the user portal all the buttons are visible under buttons. We can not save any changes to the buttons type, parameter or label. We create specific profiles in the domain and we can change in the user portal type,parameter and label vodia works on the matter or it is a misconfiguration of us thanks

Hello, we have connected a snom and a yealink to the vodia and get a TLS connection for the snom and a TCP connection for the yealink. The Vodia has a Yealink certificate but why not create a TLS connection for the phone we use the redirection service from yealink ? Vodia Version 58.1 thanks Nebenstelle Kontakt Adresse Gerät MAC Dauer 10 192.168.1.23:2066 tls:85.220.xxx.xx:2066 snom320/8.7.5.35 000413xxxxxxxB 30 192.168.1.25:5060 tcp:85.220.xxx.xx:12195 Yealink SIP-T41P 36.81.0.70 Settings / Security Yealink Equipment Issuing CA Vertrauenswürdige Root CA (für Client Authentifizierung)

Hi Chrispopp Thanks for the info with the setting directly configured by PNP!

Hi, the firmware is the same can call you maybe via remote we can check this thanks

Hi, we have connect the phone to version 58.1 also with the firmware 8.7.3.25 but is not working, we see in the log the phone but in the display is displayed "HTTP password not set" it works at 57.2 (Debian64) with firmware 8.7.3.25 We have tested a snom 760 and this work on 58.1 without problems, we have so many snom 320 It is perhaps also a firmware problem? thanks

thanks, the firmware of the snom change to 8.7.3.25 fix this problem anybody know why

Hi, is it possible the Brias softphone connects to the phone book of vodia pbx via LDAP or another way. thanks

Hi, I noticed if you have multiple email accounts in Outlook then activesync does not work, is only one email account and one contacts folder active the active sync are run without problems. With multiple email accounts stop the sync with the following message Active sync aborts with the following message [7] 17: 49: 46.243 WEBC: https: outlook.office365.com: 443: Return code 200 [5] 17: 49: 46.244 WEBC: Activesync Status Error: Failure 2. Status any idea how we can handle multiple email accounts in outlook. thanks

Hi, access to the domain adress book via ldap which account data are required. thanks

Hi, For example: All calls to extension 40 are redirect to extension 50, in the user portal for extension 40 all the redirect call are shown in the history but not on the phones history. Is it possible to see the redirect calls also on the phone? thanks

Hi, the redirection service from snom is for us not working anymore with the new version 58.1. We see the mac address on the snom server and the telephone contact the pbx but no provision is going on. any idea thanks [8] 19:19:23.040 PROV: HTTP: Received request for file snom320-000413.htm from 193.xxxxxxx [8] 19:19:23.040 PROV: PnP: Extracted MAC 000413 for file snom320-000413.htm [8] 19:19:23.040 PROV: Provisioning file snom320-000413.htm looking for MAC 000413 [8] 19:19:23.041 PROV: PnP: Using the credentials of 20@localhost for file snom_320.xml [8] 19:19:23.042 PROV: HTTP: file snom320-000413.htm based on template snom_320.xml is sent to 193.xxxxxxxx

Hi, our solution until the HTTP and co take over the TAPI Estos The new ECSTA 5 Release contains driver for yealink and snom ;-) https://download.estos.de/download?ecsta__de-DE_releasenotes_2&checksum=609388f915fc49d28df79013edc3701434bd6331 and only TAPI Driver for TAPICALL etc. we use driver from http://www.phonesuite.de/ also available for yealink and snom yealinks and snom phones are well supported with this solution.

Hi, thanks for answer We can change this in the template and all user with the same phone have after PNP this account credits For the assignment of the TAPI drivers we need for each user different accounts the webaccess is not working for the phone maybe we have a misunderstanding. CTI is not well supported from Vodia the TAPI driver work not stable with limited features and associated with too much support with customers and in the end we give up. The manufacturers of CTI solution support CSTA but not the Vodia PBX and give no support! https://www.c4b.com/de/index.php https://www.estos.de/ http://www.caseris.de/produkte/cti/ For every tip who knows a solution that works I am very happy We are trying to setup that CTI solution http://phonesuite.de/ have TAPI for snom and yealink the solution is not to big very smart and inexpensive. thanks

Hi, we want to get a other snom TAPI drivers for CTI to work, but we need user level access not admin access to the phone with PNP is a user level provision ? In the config file we found not the right data to access as user level in the phone. <http_client_user perm="RW">xxxxxxxxx</http_client_user> <http_client_pass perm="RW">xxxxxxxxx</http_client_pass> <user_pass idx="1" perm="RW">xxxxxxxx</user_pass> <http_user perm="RW">admin</http_user> <http_pass perm="RW">xxxxxxxxxxxx</http_pass> <ldap_password>xxxxxxxxxxx</ldap_password> <user_host idx="1" perm="RW">xxxxxxxxxxxxxxxx</user_host> <user_pass idx="1" perm="RW">xxxxxxxxxxx</user_pass> thanks