shopcomputer

I see 0 messages for those users.

Both clients are upgrades from 4.5.1050 to 1075. Both had recording turned on, on one I turned off after the upgrade it did not fix it. What did fix it was changing the default mailbox size from 20 to unlimited.

I have 2 customers that complained about getting this message with empty messages after this update, please check for a glitch. Your mailbox is full with 24 messages Please read and delete existing voicemails from your mailbox. Otherwise, people can not leave voice messages for you.

Running v4.5.0.1075 Delta Aurigids (Win64) now, it is less than 24 hours since service was restarted, and sysyem slowed down. Web interface is slugish, auto atendant has a delay between prompts and transfer takes an extra few seconds. A restart of the service will speed it up for a while. Attached is a taskman screenshot, showing the resource utilization, I never saw this on other systems. This machine has dual 2.66GHZ Xeon processors and 4GB Ram, 1 sangoma pri card, less than 50 extensions. System Status Overview: Please use the information shown on this web page when you request help from the support team. Version: 4.5.0.1075 Delta Aurigids (Win64) Created on: May 7 2012 12:44:01 License Status: snom ONE blue License Duration: Permanent Additional license information: Upgrade: 01 01 2014 Working Directory: C:\Program Files\snom\snomONE MAC Addresses: DNS Servers: 8.8.8.8 4.2.2.2 192.168.2.7 192.168.2.6 CDRs: Duration(7d): trunk = 998, extension = 392, ivr = 1684 Calls: Total 78/7, Active 2/4 Calls SIP packet statistics: Tx: 41430 Rx: 41761 Emails: Successful sent: 6 Unsuccessful attempts: 0 Uptime: 2012/5/9 10:42:02 (uptime: 0 days 10:56:33) (97MB/4094MB 20% 80526-0) WAV cache: 4 Number of HTTP sessions: Sessions: PAC=0, HTTP=2; Threads: SIP=42, HTTP=6 Domain Statistics: Total Domains: 1, Total Accounts: 47

Was this http://forum.snomone.com/index.php?/topic/5846-wave-input-screaching/page__p__24716__hl__music__fromsearch__1#entry24716 fixed in this release, I don't see it in the release notes.

Which phones are you using and what firmware version?

The HDD has plenty of free space 99GB fre on a 136GB drive. Access list is clean, I don't see any intrusions. Task manager shows CPU at 0% and memory at 19%.

We have an issue on a system running 4.5.1059 Win64, after the system is running for a while it slows down, meaning all the auto attendant greetings start speaking slow, and maybe transfering a call also takes longer. A reset of the Snom One service helps for a few days and then it slows down again, please advise. Thanks,

IP routing lists should work, I used it many times with Zywall's example 192.168.100.0/255.255.255.0/192.168.100.250 0.0.0.0/0.0.0.0/23.23.23.50 this should fix your audio and local and remote phones. port forward all used ports to the pbx IP.

2011-4.5.0.1050 has the same problem.

There is no file, playing using wave input from a radio.

If I set music on hold to wave input we hear about 5 seconds of music from the wave input and the about 5 seconds of screaching noise, and the again 5 seconds music and 5 seconds of screaching noise and this loops constantly. I plugged a speaker in to the PBX and music plays nicely, music from a file also plays OK. v2011-4.5.0.1030 Beta Corona Austrinids (Win64).

If you need keycode or RFID I think you will need the 2N door phone.

There is now a 8.7.3.7 beta available http://wiki.snom.com/Firmware/V8/Beta

PBX 4.5.1030 Phone 760 8.7.3.5 single domain.

Something seriously wrong, I removed all mac addresses from the extension 201, rebooted the phone, the generated file was created good. I put back the mac addresses on 201, rebooted the phone, the generated file was created no good again. it had extension 201, 219 and 234 again. and also added a 4th. ext 309.

I deleted the generated files, it gets recreated with all 3 identities.

I have a snom 760 which autoprovisiong is adding 2 extra identities that do not belong there. This is a remote phone being provisioned using the http://ipaddress/prov/snom760.htm. The Qos/security has 201 for the http client, and has the domain provisioning password, and we expect it to be provisioned for 201 only. And it worked fine till last week. However the phone is being provisioned for 201, 219 and 234. I tried removing the identities, deleting contents of the generated forders, however after rebooting the phone they reappear. I verified the phones's MAC address is not listed on the registration tab of these extensions. The snom_820_phone xml file shows all 3 identities. The only thing I can think of, however I don't know why this will happen, these 3 users share 1 m9 base station, the MAC address of the base station is listed on the registration tab of these 3 users, and provisions successfully. I don't see why this will intefere with the 760 provisioning. This user has a 720 too which is on premise which is not being affected with this issue.

I can't figure this out, on my in house demo system if I call another extension it shows the name of the person I am calling, on my customers system with same 4.5 and same 720 phone it shows calling 200@localhost?

This is not a caller ID issue, this is a ldap lookup issue, problem is with the callers phone not showing the name of the person he is calling. 5] 2012/02/16 21:01:55: SIP Rx tls:192.168.2.52:40159: INVITE sip:200@localhost;user=phone SIP/2.0 Via: SIP/2.0/TLS 192.168.2.52:40159;branch=z9hG4bK-caq8414m71p8;rport From: "Ronald M Weiss" <sip:201@localhost>;tag=qusj28c34z To: <sip:200@localhost;user=phone> Call-ID: 18b53d4f5033-hlbw26u4efrp CSeq: 1 INVITE Max-Forwards: 70 Contact: <sip:201@192.168.2.52:40159;transport=tls;line=m6u5wcbu>;reg-id=1 X-Serialnumber: 0004137004E1 P-Key-Flags: resolution="31x13", keys="4" User-Agent: snom720/8.7.3.201202132240 Accept: application/sdp Allow: INVITE, ACK, CANCEL, BYE, REFER, OPTIONS, NOTIFY, SUBSCRIBE, PRACK, MESSAGE, INFO, UPDATE Allow-Events: talk, hold, refer, call-info Supported: timer, 100rel, replaces, from-change Session-Expires: 3600;refresher=uas Min-SE: 90 Proxy-Require: buttons Content-Type: application/sdp Content-Length: 735 v=0 o=root 1945276751 1945276751 IN IP4 192.168.2.52 s=call c=IN IP4 192.168.2.52 t=0 0 m=audio 53042 RTP/AVP 9 0 8 3 97 98 99 100 106 107 108 109 18 101 a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:4FFC8dTY4Aics1WC48YzDKqCKTvx7aXnE8kFqsGi a=rtpmap:9 G722/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:3 GSM/8000 a=rtpmap:97 G726-16/8000 a=rtpmap:98 G726-24/8000 a=rtpmap:99 G726-32/8000 a=rtpmap:100 G726-40/8000 a=rtpmap:106 AAL2-G726-16/8000 a=rtpmap:107 AAL2-G726-24/8000 a=rtpmap:108 AAL2-G726-32/8000 a=rtpmap:109 AAL2-G726-40/8000 a=rtpmap:18 G729/8000 a=fmtp:18 annexb=no a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=ptime:20 a=rtcp-xr:voip-metrics stat-summary=loss,dup,jitt a=sendrecv [8] 2012/02/16 21:01:55: Allocating for call port 127, SIP call id 18b53d4f5033-hlbw26u4efrp [8] 2012/02/16 21:01:55: Could not find a trunk (3 trunks) [5] 2012/02/16 21:01:55: SIP Tx tls:192.168.2.52:40159: SIP/2.0 100 Trying Via: SIP/2.0/TLS 192.168.2.52:40159;branch=z9hG4bK-caq8414m71p8;rport=40159 From: "Ronald M Weiss" <sip:201@localhost>;tag=qusj28c34z To: <sip:200@localhost;user=phone>;tag=f9b616cc8b Call-ID: 18b53d4f5033-hlbw26u4efrp CSeq: 1 INVITE Content-Length: 0 [7] 2012/02/16 21:01:55: Set packet length to 20 [6] 2012/02/16 21:01:55: Call-leg 127: Sending RTP for 18b53d4f5033-hlbw26u4efrp to 192.168.2.52:53042, codec not set yet [8] 2012/02/16 21:01:55: Call from an user 201 [8] 2012/02/16 21:01:55: To is <sip:200@localhost;user=phone>, user 23, domain 1 [8] 2012/02/16 21:01:55: To user 200 [8] 2012/02/16 21:01:55: Call state for call object 58: idle [8] 2012/02/16 21:01:55: Call state for call object 58: alerting [8] 2012/02/16 21:01:55: Play audio_moh/noise.wav, caching true [7] 2012/02/16 21:01:55: Call port 127: set_codecs for 18b53d4f5033-hlbw26u4efrp codecs "", codec_preference count 7 [8] 2012/02/16 21:01:55: Allocating for call port 128, SIP call id ebc83077@pbx [7] 2012/02/16 21:01:55: Call port 128: set_codecs for ebc83077@pbx codecs "", codec_preference count 7 [5] 2012/02/16 21:01:55: SIP Tx tls:192.168.2.40:2072:

I just set up a client with latest 4.5.1030, using Snom 300 and 720 phones. When they call another extension is shows calling xxx.localhost instead of showing the name of the person they are calling. The directory button pulls up the names fine.

That is exactly why snom one you not use the domain authentication pin for provisioning the snom m9.

Obviously I can change the pnp file to do that, however I don't think it is best practice to auto-provision the domain pin for the snom pin, many of us use complicated pins that include letters and symbols.

Is there any way we can set a 1 minute max call duration to the paging extension? We had many users mistakenly press the paging button and forget and not even notice, especially in playback mode. They then have a 1 hour paging playback of dead air.

It looks like the snomone provisions the m9 pin automatically with the domain pin, the problem is the m9 only accepts a 4 digit pin, so we can not register handset, etc. if our domain pin is longer and has letters or symbols.