Pradeep

You can grab the latest and greatest here - http://pbxnsip.com/download/pbxctrl-3.0.1.3023.exe

Currently it refreshes automatically, every 5 or 10 seconds

Does this wiki link help http://wiki.pbxnsip.com/index.php/CO_Lines ?

Looks like this is similar to the post http://forum.pbxnsip.com/index.php?showtopic=1203&hl= Could you please download the version specified in this post and verify? thanks

Can you please verify the PBX log file to see whether PBX is receiving *78 and *79 codes during the DND ON and OFF operations? Alternatively, you can also verify it in the SIP trace of the snom 360

This generally means that the PBX disconnected the call because there was no media for 120 seconds

You can add the static registration under "Registration" tab of the extension. At the bottom of the page you will see "Add Contact", type in the contact as described and hit "save"

Checkout this wiki link http://wiki.pbxnsip.com/index.php/Manual_Registration

Can you please get us the PBX log (with the SIP logging enabled)? or the wireshark network trace will be okay too.

This is not a problem. There are some translations missing for non-english languages. Just some debug info to see what is missing. We will remove them from the default output.

Have you already checked this page http://wiki.pbxnsip.com/index.php/Installi...N_gateway_setup ?

We will add something capability to call the CRM's URL in the next release.

The agent group redirect(Field: If the caller already waited longer than (s)...) is applicable if all the agents in the queue are really busy. Ex: If the group has 2 agents and both are on the call then, the for the 3rd call (new incoming call) this settings apply. That means, after the waiting interval, say 20 econds, the call will be redirected to the redirect destination.

I am not sure I followed the issue completely. But if you are looking for how to set the DTMF match list on the IVR node, there is example under http://wiki.pbxnsip.com/index.php/UHLL_Interface#Maid_Codes. With match list shown in the example, pbx collects digits until you press the pound (#) key.

Using the help of http://wiki.pbxnsip.com/index.php/Changing_the_Appearance, I just tested this. It seem to work fine. (if you keep the logo2.gif under html/img folder, please use html/img/logo2.gif on the "Appearance" page). Make sure that you clear cache on the browser. Otherwise the changes wont show up.

I am not sure whether you have already tried setting "Accept Redirect" flag to "yes" in the trunk settings page.

Currently, this has been tested only on Intel. BTW, what is UB?

We have posted the version 1.9.2.22 that has a configuration setting for the popup on the 'Settings' tab. With this you can turn it on or off.

On the latest software I tried setting the codec preference on an extension and it seem to work fine. What version of the PBX are you running?

He might have suggested to check it under the trunk configuration.

We have plans do that on the next pbxnsip software update.

We have added a new section in the wiki for this purpose. Here is the link to the section http://wiki.pbxnsip.com/index.php/Creating...sing_CSV_import

Well, the target was built using the latest MAC version, v10.5 Leopard. But you should be able to run it on v10.4, Tiger. More on the MAC versions http://www.opensource.apple.com/darwinsource/

Yes...yes. We have released the MAC version of the PBX. It is available on our software download page under "Mac OS (Darwin 9.0)" name. http://www.pbxnsip.com/software

Latest 3.x version(3.0.0.2298) should has fixed this problem