chidcp1

Hi, there is nothing obviously wrong. Snomone is configured to use ports 81 and 444. When I upgrade to 5.2 and get the port error messages, I can still see pbx.xml contains ports 81 and 444, but the 3.2 version is not taking any notice of pbm.xml. As soon as I go back to 3.1.1/3 it correctly uses ports 81/444, without me having to touch pbx.xml or reset anything. I really think there is an issue with 3.2 for Mac failing to take any notice of pbx.xml at startup? Please let me know if you need any other details. Thanks

Hi, Tried to update from 5.1.3 to 5.2 the other day and hit similar problems to others have reported, but managed to reinstall back to 5.1.3. Saw you said there had been problems and that you had rebuilt the upgrades, so I've just tried again and still get problems! This is running on a Mac Mini under Mavericks Server. After entering the upgrade xml address, it says that it has been successfully updated so I unload/load Snomone to restart it. I cannot gain access to the web interface and looking at the Snomone console log, I see Starting up [0] 20140227152717: Upgrading from 1.x to 2.0 [0] 20140227152718: HTTP: Port number 0 is invalid, taking 80 instead [0] 20140227152718: TCP(IPv4): Could not bind socket to port 80 on IP 0.0.0.0 [0] 20140227152718: Could not open TCP port 80 [0] 20140227152718: HTTP: Port number 0 is invalid, taking 80 instead [0] 20140227152718: TCP(IPv6): Could not bind socket to port 80 on IP [::] [0] 20140227152718: Could not open TCP port 80 [0] 20140227152718: TFTP: Port number 0 is invalid, taking 69 instead [0] 20140227152718: Last message repeated 2 times [0] 20140227152718: TCP(IPv4): Could not bind socket to port 5060 on IP 0.0.0.0 [0] 20140227152718: Could not open TCP port 5060 for SIP [0] 20140227152718: TCP(IPv6): Could not bind socket to port 5060 on IP [::] [0] 20140227152718: Could not open TCP port 5060 for SIP [0] 20140227152918: HTTP: Port number 0 is invalid, taking 80 instead [0] 20140227152918: TCP(IPv4): Could not bind socket to port 80 on IP 0.0.0.0 [0] 20140227152918: Could not open TCP port 80 [0] 20140227152918: HTTP: Port number 0 is invalid, taking 80 instead [0] 20140227152918: TCP(IPv6): Could not bind socket to port 80 on IP [::] [0] 20140227152918: Could not open TCP port 80 [0] 20140227152918: TCP(IPv4): Could not bind socket to port 5060 on IP 0.0.0.0 [0] 20140227152918: Could not open TCP port 5060 for SIP [0] 20140227152918: TCP(IPv6): Could not bind socket to port 5060 on IP [::] [0] 20140227152918: Could not open TCP port 5060 for SIP It does not appear to be taking any notice of the specified ports in the configuration pbx.xml file? I've yet again had to reinstall/upgrade back to 5.1.3. After reinstalling 5.1, it reads the correct ports etc from pbx.xml. Please advise if there is still a problem with the Mac OSX upgrade, or let me know if you need more details. Thanks