sandromonte55

hi, bought a Snomone Mini on ebay, to use as a reserve pbx. It has software Zeta Perseids v. 4.5.1.1107. When I log in by ssh under Mac OS Terminal, it says: You are required to change your password immediately (root enforced) Linux snomonemini 2.6.33.6 #4 PREEMPT Thu Dec 8 03:18:43 EST 2011 armv5stel I change the password, but everytime I log in it requires again……. Can I eliminate this inconvenience ? it is very annoying, and the risk is to lost password…. This did not happens on my old Snom mini… the only difference is that the old one has Epsilon Geminids.. TIA

hi, updating: problem resolved, the PBX needed a few minutes for synchronization, now it works properly, date and time correct ! ! many thanks for the help ! -sandro

Hi, used vi editor (with some difficult..) to modify /etc/ntp.conf file and changed ntp.snom.con to pool.ntp.org as you can see below in the attachment, saved file, exit. I restarted the PBX, but seeing in status window i have again uptime 1970/1/1 ...... help !

excuse, but can you tell me what i need to type into the terminal once i have logged ,to do that you suggest me? be patient, please, i' m not an expert on this...... i tried what you can see below to see what was the ntp server settings, but it don' t work, sure i typed wrong..... TIA Last login: Thu Jan 1 16:58:55 1970 from 192.168.0.64 root@snomonemini:~# /etc/ntp.conf -bash: /etc/ntp.conf: Permission denied root@snomonemini:~# etc/ntp.conf -bash: etc/ntp.conf: No such file or directory root@snomonemini:~#

Done ! I have changed the pw ,as you said, and now i can access the snomOne mini (see below) Now can i try to set the NTP server ? Last login: Sun May 14 13:21:44 on ttys000 MacMini-Server:~ server$ ssh root@192.168.0.11 root@192.168.0.11's password: Linux snomonemini 2.6.33.6 #4 PREEMPT Thu Dec 8 03:18:43 EST 2011 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Thu Jan 1 00:00:59 1970 from 192.168.0.2 root@snomonemini:~#

Hi, I did exactly what you suggest. In my case i used "root" as username, and the web administrator pw that is "snowONE" but as you can see in the previous post, i do not have the permission..

Hi, i tried restarting the snomMini several times, via software and also removing power cable (POE cable). The only test I didn't was the reset to default values. I tried with many user name and password but it denied permission. Do I have to tell the PBX what door to use? below the command i used..... Last login: Sun May 14 08:09:24 on ttys000 MacMini-Server:~ server$ ssh admin@192.168.0.11 admin@192.168.0.11's password: snomONE Permission denied, please try again. admin@192.168.0.11's password: snomone Permission denied, please try again. admin@192.168.0.11's password: blank Permission denied (publickey,password). MacMini-Server:~ server$ ssh root@192.168.0.11 root@192.168.0.11's password: snomONE Permission denied, please try again. root@192.168.0.11's password: blank Permission denied (publickey,password).

Hi, i 'm trying to connect via ssh to the snomONE but i have a"Permission denied" I type the followig command ssh admin@192.168.0.11 it ask me the password;: i type administrator pw (nome utente admin, password snomONE) but the response is "Permission denied" what is the error ? do I need to type something else (i.e port number) ? -sandro

The strange thing is that until yesterday it was working properly. After the power failure i had that issue.. Is there a buffer battery to save date and time into the snom mini ?

Ok, many thanks.. by the way, looking into the file pbx-config, that I found inside a configuration backup, i have seen the following rows: <timezone>CET</timezone> <ntp_host>pool.ntp.org</ntp_host> So it seems that the NTP Server is "Pool.ntp.org" and this server seems to be active Any ideas ?

Hi, yes, i could log in from one of my Mac on the local network.. can you give me some instructions ? thanks

Hi to all, i'm a snomONE mini user from about 4 years. All worked well in my office, but a couple of days ago, after a power failure, when my Snom mini started up,it didn't work properly. I saw that in it showed a wrong date and hour, and exactly 1-1-1970, hour 00:00 I supposed it needed a little of time to refresh that date but it did't happen. Can anyone help me to understand this and resolve the problem ? below a screenshot of status page.. Thanks in advance -sandro