Jump to content
Vodia PBX forum

martin@blacktec.de

Members
  • Content Count

    4
  • Joined

  • Last visited

Community Reputation

0 Neutral

About martin@blacktec.de

  • Rank
    Newbie
  1. I'm trying to add the ActiveSync (https://doc.vodia.com/activesync) but I'm not able to find the configuration menu. My license is Vodia PBX Standard 4 . On the feature comparison sheet I did't find any information about ActiveSync so it should be available in the Standard edition or do I have to switch to another license type? Or am I only "to blind" to see the link?
  2. Great! After setting TCP I also checked the codecs. There were no codecs settings at all. So I set the default and now it's working. Thanks! The headsets on the M700 can be "paired" with a handset. To achieve this you have to set the option "paired terminal" at the extension (eg. Terminal Idx 1 = M65, Terminal Idx 2 = A190). Afterwards you can switch between those both while calling by simply pressing the "green" button (or you can dial on the handset and then switch to the headset with one click). My workaround was to give them separate extensions and afterwards I manually paired them in the M700. One issue for the basic configuration is how to configure the multi cell support of the M700. Do I have to do this in the M700 after provisioning or can this configured by provision?
  3. Meanwhile I'm a big step further. I think the reboot didn't work on the M700 successfully. I did the manual provision again and now it worked smooth! So now I have the first two M65 which also have been registered to the M700. But now I have further problems... - If I try to do an internal call between the two M65 there is only the announcement that the extension is not available. Here is the log: [5] 23:49:18.960 Last message repeated 2 timesⓘ [5] 23:49:18.960 Port 41: Incoming call in domain localhost on port 41 extension 10ⓘ [5] 23:49:18.961 Call 18: New call created with Call-ID 41ⓘ [4] 23:49:18.961 Dial number 20 from user 10 and dial plan Defaultⓘ [2] 23:49:19.004 LDAP request coming from a non-extension user id 0ⓘ [5] 23:49:19.296 INVITE Response 488 Not Acceptable Here: Terminate 3ccc7187@pbxⓘ [5] 23:49:19.298 The JS CDR interface requires a CRM licenseⓘ [5] 23:49:19.299 Cannot terminate non-existing call port (call-id=42)ⓘ [5] 23:49:22.188 The JS CDR interface requires a CRM licenseⓘ [5] 23:49:22.192 Last message repeated 2 timesⓘ [5] 23:49:22.192 Cannot terminate non-existing call port (call-id=41)ⓘ - also, if I make a call from extern only the mailbox of the extension answers. So my question is - why are the extensions in status "not available" for Vodia? Where can I check what happens? Apart from this (basic) problem my next steps will be to add the A190 headsets to the extensions - I hope this is supported by Vodia (for switching between handset and headset) and the master/slave-configuration for the 2nd M700. If somebody has some hints for configuring that I will appreciate it
  4. I have troubles with the provisioning of my snom M700. Under "Management" I resetted the DECT base station with "Default Base Station". In the SIP Log I see several Subscribe tries, but Vodia doesn't see the M700 (I think it should be be listed under Phones > LAN Devices): Sent to udp:224.0.1.75:5060 at 09/06/2020 20:20:30 (684 bytes) SUBSCRIBE sip:MAC%3a0004XXXXXX@224.0.1.75 SIP/2.0 Via: SIP/2.0/UDP 10.111.40.64;branch=z9hG4bKy6xqp9cxgo6s Then I tried to do the manual provision and wanted to add the provision url to Management > Configuration > Configuration Server Address. The documentation says it should be http://address/prov/snomMMMMM.htm, that means in my case http://pbx-ip/prov/snomM700.htm but that also doesn't work. I also added the IPEI of one of my M65 handsets in the "Parameter 1" on the tab Extensions > Registration > User agent setup. M700 Firmware: IPDECT/04.50/B0013/12-Nov-2019 14:03 Vodia PBX: 65.0.8 (Debian64) Any hints what's wrong?
×
×
  • Create New...