Jump to content

pbxnsip, Speech Server 2007 and x-lite


Shwetha RK
 Share

Recommended Posts

Hi

 

we have already a speech server 2007 application. we hv got a 3 minutes license frm pbxnsip.

we have created an account in http://www.callcentric.com/ and added this as a trunk in pbxnsip adminstration interface.

we hv also created an 9999 extension. we hv configured the http://www.callcentric.com/ account on x-lite also.

pls guide us how to integrate between pbxnsip, our speech server application and x-lite softphone.

 

Regards,

Shwetha R.K

Link to comment
Share on other sites

Hi

 

we have already a speech server 2007 application. we hv got a 3 minutes license frm pbxnsip.

we have created an account in http://www.callcentric.com/ and added this as a trunk in pbxnsip adminstration interface.

we hv also created an 9999 extension. we hv configured the http://www.callcentric.com/ account on x-lite also.

pls guide us how to integrate between pbxnsip, our speech server application and x-lite softphone.

 

Regards,

Shwetha R.K

 

have you checked out the forum entries in section http://forum.pbxnsip.com/index.php?showforum=62 ?

Link to comment
Share on other sites

yes we chked it. but we are not getting which number we shld call from x-lite so dat it goes to our speech server application through pbxnsip.

 

From the pbxnsip side all you need is to create a trunk that points to the speech server address, dialplan that uses this trunk and assign the dialplan to the account(x-lite extension). On how to create the trunk and the dial plan check out these links

http://wiki.pbxnsip.com/index.php/Trunk_Settings

http://wiki.pbxnsip.com/index.php/Dial_Plan

After the configuration, dial the number that you specified on dialplan and that should send the call to speech server.

Link to comment
Share on other sites

From the pbxnsip side all you need is to create a trunk that points to the speech server address, dialplan that uses this trunk and assign the dialplan to the account(x-lite extension). On how to create the trunk and the dial plan check out these links

http://wiki.pbxnsip.com/index.php/Trunk_Settings

http://wiki.pbxnsip.com/index.php/Dial_Plan

After the configuration, dial the number that you specified on dialplan and that should send the call to speech server.

 

we are getting these details from pbxnsip log

 

[5] 2008/10/07 06:39:30: Identify trunk (line match) 3

[5] 2008/10/07 06:39:30: Trunk calllcentric sends call to 17772335784

[5] 2008/10/07 06:39:30: Trunk call: Could not identify user

 

wat does dis mean and wat shld we need to continue

Link to comment
Share on other sites

we are getting these details from pbxnsip log

 

[5] 2008/10/07 06:39:30: Identify trunk (line match) 3

[5] 2008/10/07 06:39:30: Trunk calllcentric sends call to 17772335784

[5] 2008/10/07 06:39:30: Trunk call: Could not identify user

 

wat does dis mean and wat shld we need to continue

 

Could you please send the call log starting from INVITE? That way we can see the complete details. BTW, you can increase the logging by using Admin->Settings->Logging page and setting "Log Other Messages" to "Yes" and increase the log level to 7 or above

Link to comment
Share on other sites

Could you please send the call log starting from INVITE? That way we can see the complete details. BTW, you can increase the logging by using Admin->Settings->Logging page and setting "Log Other Messages" to "Yes" and increase the log level to 7 or above

 

the log details r here

 

[5] 2008/10/10 05:21:31: Identify trunk (line match) 3

[5] 2008/10/10 05:21:31: Trunk calllcentric sends call to 9999

[5] 2008/10/10 05:21:31: Attendant: Redirect to

[5] 2008/10/10 05:21:58: load: Index domain not set

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...