McFone 0 Report post Posted December 12, 2017 Hi, what are the steps to provision a cisco 8851 over WAN (hosted) and run it with german language? thanks Share this post Link to post Share on other sites
Vodia PBX 0 Report post Posted December 13, 2017 There is no redirection server for those phones, so you will have to get into the web interface and set up the "Profile Rule". Then make sure that you open the MAC in the PBX web interface for provisioning (pairing), and then the phone should fetch the settings. 59.2 will come with some major updates mainly for the buttons; however for WAN setup prodecure will not change. Share this post Link to post Share on other sites
McFone 0 Report post Posted December 16, 2017 Hi, the web interface of the phone only displays data, you can't change it here. Profile rule is the pnp_cisco. xml, which entries are to be changed? In the phone I set the TFTP server to the IP of the hosted Vodia and set the MAC and open for provising in the Vodia, unfortunately without success. How do I get Cisco to the Vodia? thanks Share this post Link to post Share on other sites
Vodia PBX 0 Report post Posted December 18, 2017 You need to make sure that this is a 3PCC phone. There is a big difference between the 8851-K9 and the 8851-3PCC-K9, these phones share the same plastic but run entirely different firmware versions. I believe it is not possible to re-program a 8851-K9 to become a 8851-3PCC-K9. Share this post Link to post Share on other sites
