Jump to content
Vodia PBX forum

Edit templates doesn't work, maybe!?

Recommended Posts

Ok we are testing Vodia PBX to use as our pbx and I need to enable access to the web interface of the registered devices.

We are using some snom 760 units and when provisioned, the template locks the web interface with an unknwon password.

Reading through the forum the suggested solution is to make a custome template to add the password that I want.

So I browse to Administrator->Customize->Templates I choose type Phone PnP and page snom_760_phone.xml

The file is loaded and I get the following

[object Object]

I paste the following

<http_user perm="RW">admin</http_user>

<http_pass perm="RW">password</http_pass>

changing the password value and pressing the save button. If I visit another part of the Vodia Web interface and come back to this page and try to edit this template by pressing the corresponding icon at the far right I get again the [object Object] string and not the two lines that I pasted earlier.

Does the form save the pasted lines or there is an error in the format and thus discards them as unvalid.

Which should be the correct options to unlock the web interface of the snom phones?

We are using the latest version of the Vodia pbx.

Share this post

Link to post
Share on other sites

You can (and should) set your password and PIN in the domain settings at the bottom. If the phones are registered, just check-sync them and then they should use that password. Better don't change the template, there is no need in this case.

Share this post

Link to post
Share on other sites



You won't be able to customize the username password section from there as it is either system generated or you can set it as advised earlier in this thread. Hence we don't allow to change that part of the template, rest sections of the template can be edited and saved though.

Share this post

Link to post
Share on other sites
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...