Jump to content
Vodia PBX forum
Henrikt

Vodia App for iOS

Recommended Posts

Hi,

I have install the App for iOS m, but when i start the App it’s only open my camera, for QR scanning. Can i only use this App with QR code? 

Share this post


Link to post
Share on other sites

Also, please upgrade the PBX to 65.0 once again (if you've already updated more than 12 hours ago from Apr 27th, 9:30 AM EST) along with the app and try again.

Share this post


Link to post
Share on other sites

Now i have upgrade to v65 and log the App on the PBX from the local network.

Where can i setup the Protocol and port for TLS, UDP & TCP in the App, so i can try it from outside the office, where i need the WAN IP and port to use it.

Share this post


Link to post
Share on other sites

You cannot set the ports on the App, it needs to be set on the PBX itself under : /reg_ports.htm and /reg_sipsettings.htm page.

Outside the network you can use LTE network which should work fine.

Share this post


Link to post
Share on other sites

The app uses web socket—so there will be no UDP. Depending on how you are logged in, the PBX will generate a HTTP or HTTPS URL for you.

Share this post


Link to post
Share on other sites

You should open ports 443 (HTTP TLS) and if you want to use LetsEncrypt certificates, you must also open port 80 (cannot be another port). For UDP, you need to make sure that the PBX UDP ports (by default 49152-65535) are also forwarded to the PBX.

Share this post


Link to post
Share on other sites
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...