Jump to content

Recommended Posts

I'm programing a Yealink T48A phone to work with a Cyberdata 011410 video door phone.  The only way I get in VIdeo is if I put the phone on hold and pick it back up.

The PBX is 65.0.7  The Yealink is58.84.0.24 the Cyberdata is on v.1.4.1 any help would be appreciated

Link to post
Share on other sites

This is Yealink's response

The Vodia PBX is not sending Video to the T58A in the original INVITE. This is not a setting that can be changed on the phone.

 

You will want to look to enable sending Video on the PBX side, or look into sending a direct SIP call to the Video phone, from the door phone (if possible).

 

The reason the phone being placed on hold, then starts the video, is because the phone sends a new INVITE when it comes off of hold. The phone is telling the PBX it has the option to send and accept video, so then the connection is made for video between the two devices.

 

You need the PBX side to send the initial INVITE SIP/SDP packet with the Video option included. There is no programmable button solution for this.

Will something be built in the PBX to allow this in the future?
Link to post
Share on other sites
17 hours ago, brocs4766 said:

This is not a setting that can be changed on the phone.

We can assure you, that we've actually tried the video call between 2 Yealinks and it has worked for us ONLY after we manually enabled the Video setting on the phone (you can quickly find that too). Before manually turning it on, we weren't getting a Video call option on the phone. 

Please turn it on and test this again and you can see the difference in the logs (if nothing else).

If all the codecs are turned on, on the PBX's end, there is no other setting that needs to be turned on for this to work.

Link to post
Share on other sites
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...