Jump to content

no ringback after change to netgear modem


Recommended Posts

can someone help me troubleshoot a ringback problem. After a Dreytek modem died on me I installed a Netgear. I am good on outgoing but callers are getting no rignback tone. 180 is not doing it with the new modem. Could it be an tcp or udp problem?

 

Make sure that anything called "SIP ALG" or "UPnP" is turned off on the router. Or use TLS to tunnel through the router that might mess with the SIP packets.

 

I also used a netgear but had no problems. I guess the models are changing quickly, so I am not sure if that helps.

 

Check if you see the 180 response on the PBX (SIP logging). Last resort would be to use Wireshark on the PBX to see what the PBX receives.

Link to comment
Share on other sites

  • 1 year later...

Getting the same issue recently install a netgear router behind a smc cable modem in hopes of better routing. I can call extensions and even outside numbers the remote phone will ring. however I do not hear ring back nor can either party hear each other when the call is answered.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...