joe Posted August 12, 2009 Report Share Posted August 12, 2009 Hi, THe MOH feature isn't working for me. I get a 'not found' response from PBX. I don't know much about PBXNSIP so could someone give me some simple steps as to how i can get this feature to work please. I using a VOIP gateway to which i have analog phones plugged in. All i have told the PBX is to play MOH. Can i assume that MOH is played when a SIP message with no SDP is sent to the PBX? Regards, Joe Quote Link to comment Share on other sites More sharing options...
mattlandis Posted August 12, 2009 Report Share Posted August 12, 2009 hi, When you first install pbxnsip with the standard config it should just work. Did you change the moh sound source? tx matt Quote Link to comment Share on other sites More sharing options...
joe Posted August 12, 2009 Author Report Share Posted August 12, 2009 hi, everything is as per default. MOH.wav file is selected. what triggers the PBX to play music? Nobody has been able to clarify this for me Cheers hi, When you first install pbxnsip with the standard config it should just work. Did you change the moh sound source? tx matt Quote Link to comment Share on other sites More sharing options...
mattlandis Posted August 12, 2009 Report Share Posted August 12, 2009 put a call on hold...holding person will hear it... matt Quote Link to comment Share on other sites More sharing options...
pbx support Posted August 12, 2009 Report Share Posted August 12, 2009 hi,everything is as per default. MOH.wav file is selected. what triggers the PBX to play music? Nobody has been able to clarify this for me Cheers Please verify whether you have a folder 'audio_moh' under the working directory. If not, please download it from the pbxnsip website. Quote Link to comment Share on other sites More sharing options...
mattlandis Posted August 12, 2009 Report Share Posted August 12, 2009 what OS? if win2008 make sure the sound is enabled..(whatever it is called) I suggest running this all on win xp pro the first time to avoid all that stuff for testing...getting yourself up to speedd... i have a $99 getting started with pbxnsip ebook if you like... matt Quote Link to comment Share on other sites More sharing options...
joe Posted August 21, 2009 Author Report Share Posted August 21, 2009 Win Xp Pro. If i use an an SJ Phone to put the other party on hold then that works fine. But using a Voip Gateway does not. The question is whether PBXNSIP supports draft-ietf-sipping-service-examples-11. I noticed that the SJ Phone sends re-invites to the PBX but the sip messaging does not follow the draft mentioned above. Thanks what OS? if win2008 make sure the sound is enabled..(whatever it is called) I suggest running this all on win xp pro the first time to avoid all that stuff for testing...getting yourself up to speedd... i have a $99 getting started with pbxnsip ebook if you like... matt Quote Link to comment Share on other sites More sharing options...
pbx support Posted August 21, 2009 Report Share Posted August 21, 2009 Win Xp Pro. If i use an an SJ Phone to put the other party on hold then that works fine. But using a Voip Gateway does not. The question is whether PBXNSIP supports draft-ietf-sipping-service-examples-11. I noticed that the SJ Phone sends re-invites to the PBX but the sip messaging does not follow the draft mentioned above. Thanks Are you talking about the registered users to the PBX or peer-to-peer interaction? Quote Link to comment Share on other sites More sharing options...
joe Posted August 24, 2009 Author Report Share Posted August 24, 2009 Registered users to PBX. I looked at the log file and just before the PBX informed me of 'Not Found', it seemed to look in the dial plan. Unfortunately i don't know how to set a dial for the pbx. I can't find any documentation. Cheers Are you talking about the registered users to the PBX or peer-to-peer interaction? Quote Link to comment Share on other sites More sharing options...
pbx support Posted August 24, 2009 Report Share Posted August 24, 2009 Registered users to PBX. I looked at the log file and just before the PBX informed me of 'Not Found', it seemed to look in the dial plan. Unfortunately i don't know how to set a dial for the pbx. I can't find any documentation. Cheers Not sure what you are referring to. At this moment it is better if you can send email to support@pbxnsip.com with the SIP logging enabled. Please see on how to get the SIP logging. https://www.pbxnsipsupport.com/index.php?_m...;kbarticleid=58 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.