X100P FXO PCI Interface

[Adamski]

Hi,

 

Will shortly be setting up a VoIP system for the home. I have an X100P SE FXO PCI card on order as I am toying between using trixbox and snomeone.

 

Will this card work with the snomone? I can't seem to find anything but maybe I'm being stupid. The forum doesn't let me search with three letter words so may have missed something here.

 

Many thanks,

 

Adam

[mattlandis]

Hi,

 

Will shortly be setting up a VoIP system for the home. I have an X100P SE FXO PCI card on order as I am toying between using trixbox and snomeone.

 

Will this card work with the snomone? I can't seem to find anything but maybe I'm being stupid. The forum doesn't let me search with three letter words so may have missed something here.

 

Many thanks,

 

Adam

 

Adam,

 

No, x100p isn't supported. Asterisk only board.

If you want an internal board then there is config directions for sangoma cards.

 

We use an external gateway Patton 4114.(is a 4 port). This is a very recommended unit (most recommended in windows world pbx people) although not nessesarily the cheapest. There is a config file generator here: http://windowspbx.blogspot.com/2010/12/patton-provides-free-pstn-gateway.html

 

There is a linksys spa unit that is 1 fxo and 1 fxs i think that there are install instructions.

 

If fxo units are just too expensive consider SIP trunk only. No gateway device needed then.

 

thanks

[Adamski]

Thanks Matt. It's just so I can plug in my home landline. Most stuff is done through VoIP. Might check out the linksys unit.

[Guest Gary Fett]

Hi,

 

Will shortly be setting up a VoIP system for the home. I have an X100P SE FXO PCI card on order as I am toying between using trixbox and snomeone.

 

Will this card work with the snomone? I can't seem to find anything but maybe I'm being stupid. The forum doesn't let me search with three letter words so may have missed something here.

 

Many thanks,

 

Adam

 

 

Your X100P SE FXO PCI board will not be compatible or supported by SNOMEONE. Check their website for some updates or driver to directly support this PCI card.