Jump to content

Snom firmware upgrading in 2.1


Kristan
 Share

Recommended Posts

Hi all,

 

Regarding the firmware upgrade options in the pnp for the snoms, what's the process for this? I have 10 360's on 6.5.8 I'd like to auto provision on a brand new PBX and thought great, I'll just let the PBX do it. Nope, when the phone subscribes to the sip mutlicast network it gets a user agent not supported back. Ok I thought, fair enough, going from 6->7 is probably a bit much to hope for, so upgraded the phone to 7.1.6 manually, reset it... and I can see it talks to the PBX via SSL, but not what happens. And the phone doesn't get upgraded any further, and it doesn't get auto-provisioned, despite me setting the MAC in the registration tab.

 

What have I done wrong? ;)

 

Also, I wanted to put 7.1.24 on, so changed the pnp config setting for the 360 in the admin menu to the 7.1.24 file, and put the firmware file in the tftp folder. Is this the right place?

 

Thanks,

 

Kristan

Link to comment
Share on other sites

Hi all,

 

Regarding the firmware upgrade options in the pnp for the snoms, what's the process for this? I have 10 360's on 6.5.8 I'd like to auto provision on a brand new PBX and thought great, I'll just let the PBX do it. Nope, when the phone subscribes to the sip mutlicast network it gets a user agent not supported back. Ok I thought, fair enough, going from 6->7 is probably a bit much to hope for, so upgraded the phone to 7.1.6 manually, reset it... and I can see it talks to the PBX via SSL, but not what happens. And the phone doesn't get upgraded any further, and it doesn't get auto-provisioned, despite me setting the MAC in the registration tab.

 

What have I done wrong? ;)

 

Also, I wanted to put 7.1.24 on, so changed the pnp config setting for the 360 in the admin menu to the 7.1.24 file, and put the firmware file in the tftp folder. Is this the right place?

 

Thanks,

 

Kristan

 

Kristan:

I'm not sure we ever got sip multicast to work properly but attached works for us and gets the phones provisioned with pbxnsip. I'm sure there are several ways to do this, and maybe some are simpler. Hope some or all of this helps.

Regards, Fred

Provisioning_Snom_360_Phones_2.doc

snom360.htm

Link to comment
Share on other sites

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...