Jump to content

Configuring Park Orbit Button

Recommended Posts

I have 2 park orbits set up, they work as intended using *85xxx and *86xxx. I'm trying to set up buttons for them through the SNOM pbx v. 4.5 to be used with the SNOM 360 phone, but to no avail. Do I need to program the function keys from the phones GUI as well? I was under the impression that if I made a button plan in the pbx and assigned it to all the phones it would work w/o further programming required.


What happens when I try to place a call on the park orbit with the button it just acts like it is switching lines (no other functions or lines are assigned to the buttons I'm trying to use). Any help would be much appreciated, thanks!

Link to post
Share on other sites

No that should be all done through the web interface of the PBX. You should use plug and play to get this working; if you manually configure things on the phone that will be difficult; there are a couple of settings that need to be set to make it happen.

Link to post
Share on other sites
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...