Jump to content

Snom 300 - service flag button


Recommended Posts

Using Snom ONE v4.5.0.1075 Delta Aurigids

 

How do I set a button on a Snom 300 handset to toggle a service flag on the PBX? I want the button LED to reflect the state of the service flag, so I assume it's not as easy as sending the appropriate * code as a speed dial.

 

Thanks in advance :)

Link to post
Share on other sites

Under "Admin->Settings->PnP" page, there are special settings for snom 300 keys 3-6. You can cleanup these first depending on the requirement, i.e., you can take out the least important key setting there and make it available for the service flag button. Then you can create and assign a button profile (http://wiki.snomone.com/index.php?title=Buttons, http://wiki.snomone.com/index.php?title=Button_Programming) for that extension.

Link to post
Share on other sites

Under "Admin->Settings->PnP" page, there are special settings for snom 300 keys 3-6. You can cleanup these first depending on the requirement, i.e., you can take out the least important key setting there and make it available for the service flag button. Then you can create and assign a button profile (http://wiki.snomone.com/index.php?title=Buttons, http://wiki.snomone.com/index.php?title=Button_Programming) for that extension.

 

Ah, many thanks. I'd got it in my head that the Snom 300 couldn't be programmed with the button profiles.

Link to post
Share on other sites

Under "Admin->Settings->PnP" page, there are special settings for snom 300 keys 3-6. You can cleanup these first depending on the requirement, i.e., you can take out the least important key setting there and make it available for the service flag button. Then you can create and assign a button profile (http://wiki.snomone.com/index.php?title=Buttons, http://wiki.snomone.com/index.php?title=Button_Programming) for that extension.

 

I have the same problem (running 2011-4.5.0.1031 Beta Corona Austrinids), but your solution doesn't work for me. If I clean the PnP setting for key 3 and assign a button profile with key 3, the key 3 has no function at all.

 

I can only configure button 1 and 2 by button profiles... Any ideas? Thanks in advance.

Link to post
Share on other sites

There is no difference between those 2 versions with respect to buttons. Just make sure you have selected the right button number.

 

I have edited "Setting for snom 300 (button 3):" in the PnP settings and button number 3 in the button profile. After deleting the value "keyevent F_REDIAL" in the PnP settings, the button has no function anymore, even if the button profile is assigned.

 

Is there a restriction, that snom 300 buttons 3 - 6 can only be configured by PnP?

 

Or is there a way to configure a service flag button in the PnP settings?

 

Thanks in advance!

 

Regards,

Joachim

Link to post
Share on other sites

Seems like 300 is not that "straight-forward". But the "Web Page Control" always there for the resue :D

 

You will have to customize the snom_300_fkeys.xml file (using the method described here http://wiki.snomone.com/index.php?title=Modifying_Plug_and_Play_Files) for the buttons to work on snom 300.

 

{if_button 3 none}
 <fkey idx="2" context="active" perm="RW">{enum_button 3 button+3 private=line}</fkey>
{fi_button 3 none}

Link to post
Share on other sites
  • 2 weeks later...
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...