Jump to content
Vodia PBX forum

Recommended Posts

Full day in the office system and 0 issues :o If all goes well this is going out into the real world for a customer waiting for park recall :)

Share this post


Link to post
Share on other sites

The MacOS version is also available as upgrade. The installer will follow later, please use the 5.0.2 or 5.0.8 installer in the meantime and then upgrade from there.

Share this post


Link to post
Share on other sites

Full day in the office system and 0 issues :o If all goes well this is going out into the real world for a customer waiting for park recall :)

 

Spoke to soon :( Unsupported Media Type Errors cutting off customers coming off park and it is coming up every so often on outbound calls

Share this post


Link to post
Share on other sites

Any one else seeing errors with dial plans on 5.10?

 

When CO line 4 is in use and you attempt to dial without pre-selecting a line (ie via softphone dialer - flexor) it will give you a Not Found error from the pbx. As you can see from the logs it is selecting the in use line and not the next available.

 

90;MNF 4 0940XXX9;;*;;;

91;MNF 3 0940XXX8;;*;;;

92;MNF 2 0940XXX7;;*;;;

93;MNF 1 0940XXX6;;*;;;

 

[5] 2013/05/21 11:33:50: Dialplan "Standard Dialplan": Match 9380XXXX@pbx.company.com.au to sip:9380XXXX@sip00.mynetfone.com.au;user=phone on trunk MNF 4 0940XXX9

[5] 2013/05/21 11:33:50: SIP Tx tls:172.28.1.82:4166:

SIP/2.0 404 Not Found

Via: SIP/2.0/TLS 172.28.1.82:4166;branch=z9hG4bK-764esf4o6slq;rport=4166

From: "Name" <sip:45@pbx.company.com.au>;tag=7t82c4lsu0

To: <sip:9380XXXX@pbx.company.com.au;user=phone>;tag=82798b75e5

Call-ID: 1deb9a51c8c6-mt3yzia6j9ne

CSeq: 1 INVITE

Contact: <sip:45@172.28.1.5:5061;transport=tls>

Supported: 100rel, replaces, norefersub

Allow-Events: refer

Allow: INVITE, ACK, CANCEL, BYE, REFER, PRACK, INFO, UPDATE

Accept: application/sdp

User-Agent: snomONE/5.0.10

Content-Length: 0

 

[5] 2013/05/21 11:33:50: SIP Rx tls:172.28.1.82:4166:

ACK sip:9380XXXX@pbx.company.com.au;user=phone SIP/2.0

Via: SIP/2.0/TLS 172.28.1.82:4166;branch=z9hG4bK-764esf4o6slq;rport

From: "Name" <sip:45@pbx.company.com.au>;tag=7t82c4lsu0

To: <sip:9380XXXX@pbx.company.com.au;user=phone>;tag=82798b75e5

Call-ID: 1deb9a51c8c6-mt3yzia6j9ne

CSeq: 1 ACK

Max-Forwards: 70

Contact: <sip:45@172.28.1.82:4166;transport=tls;line=bkwxc3sx>;reg-id=1

Proxy-Require: buttons-snom821

Content-Length: 0

Share this post


Link to post
Share on other sites

If you use CO lines then the PBX will always try to bind a call to a CO line for that trunk. If there are no more CO lines, then it will fail. Can you increase the log level? I guess there must be some more messages that tell us more why it sends "404 Not Found"

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...