Jump to content

Version 5.1.0 has been released


Vodia PBX

Recommended Posts

We have made builds for all operating systems for version 5.1, including the installers for Windows. The release notes can be found on the Wiki as usual.

 

Thanks for all for the numerous feedback that we have received for version 5.0.10[b-p]! This version is for sure the best version ever :).

Link to comment
Share on other sites

ver 5.1 release notes:

 

"When creating an extension, there is no more field for passwords. Instead, the PBX is generated good passwords by default. Also, the PBX automatically opens the new extension for provisioning (unless disabled by a new settings)."

 

Does this mean we can't choose our own passwords when creating an extension? This would be a major set back if it's true.

Link to comment
Share on other sites

I noticed Grandstream support for 140x, is there a possibility the 1450 plus the 21xx/22xx line may be coming soon. I have a job with these phones on it and the BLFs give me an issue. If a phone reboots, all the BLFs go blank until the corresponding extension or parking spot is used then the buttons work fine until the next reboot.

Link to comment
Share on other sites

I noticed Grandstream support for 140x, is there a possibility the 1450 plus the 21xx/22xx line may be coming soon. I have a job with these phones on it and the BLFs give me an issue. If a phone reboots, all the BLFs go blank until the corresponding extension or parking spot is used then the buttons work fine until the next reboot.

 

It is the plan to add more and more GrandStream devices. The challenge is to actually have the devices in-house for testing everything out. But maybe we can just use the 1400 as template and then make incremental changes. Let me know if you can help us testing it.

Link to comment
Share on other sites

 

It is the plan to add more and more GrandStream devices. The challenge is to actually have the devices in-house for testing everything out. But maybe we can just use the 1400 as template and then make incremental changes. Let me know if you can help us testing it.

 

I will see if I can get my hands on one to send back to you. I got it approved to send you a GXP2100 as long as we can get it back sometime. Let me know where to send it. I also have a GXW4104 gateway I can let you borrow, I know it is not a phone but if it is of use I will send it.

Link to comment
Share on other sites

Looks like the provisioning bug has been reintroduced.

 

Did not write snom_821.xml to file system because there is no user associated with this file [5] 2013/07/24 10:13:22: Alert(1, 0) [5] 2013/07/24 10:13:22: Did not write snom_3xx_fw.xml to file system because there is no user associated with this file [5] 2013/07/24 10:13:22: Alert(1, 0) [5] 2013/07/24 10:13:22: Last message repeated 3 times [5] 2013/07/24 10:13:22: Did not write snom_web_lang.xml to file system because there is no user associated with this file [5] 2013/07/24 10:13:22: Alert(1, 0) [5] 2013/07/24 10:13:23: Did not write snom_gui_lang.xml to file system because there is no user associated with this file [5] 2013/07/24 10:13:23: Alert(1, 0) [5] 2013/07/24 10:13:25: Did not write snom_3xx_fs.xml to file system because there is no user associated with this file
Link to comment
Share on other sites

Some devices have no valid certificate. It seems that there are good and bad devices... If you get a message like this, open the account for provisioning from the web interface. 5.1 also contains a new setting (admin/provisioning/settings) where you can set how long an extension should be open for provisioning. The default of 10 minutes was in many cases too short, especially in LAN environments where the risk of getting hacked is relatively low. Also make sure that you have the right MAC set for the extension.

Link to comment
Share on other sites

Some devices have no valid certificate. It seems that there are good and bad devices... If you get a message like this, open the account for provisioning from the web interface. 5.1 also contains a new setting (admin/provisioning/settings) where you can set how long an extension should be open for provisioning. The default of 10 minutes was in many cases too short, especially in LAN environments where the risk of getting hacked is relatively low. Also make sure that you have the right MAC set for the extension.

 

Changing back to 5.0.10m resolved the issue instantly.

Link to comment
Share on other sites

Yes, pretty much. The GXP14xx have no BLF buttons, which makes it easy to provision them. A model with buttons is on the way. We were trying to use the multicast method, but could not get that to work. But at least the phones can set the provisioning server through the phone user interface (keyboard), so that it is practical to roll out these devices using this method as well.

Link to comment
Share on other sites

In the previous versions, this HTML content was largely generated by the PBX core itself. We are changing that to use JavaScript in the browser instead. It sometimes seems like a step back; however now it is a lot easier to make changes to the appearance. Newer versions will eventually go beyond what has been done before.

Link to comment
Share on other sites

Ok thanks, another note this might be a bug but if the call recordings are stored in a folder that is not in the directory of the PBX. Then they cannot be accessed through the web interface? I just get an error saying the file cannot be found.

 

If however I change it back to the default I can access the recordings..

Link to comment
Share on other sites

Hi,

 

I just got my hands on a Grandstream 1405 phone. I was able to upgrade its firmware to the latest version, but have not been able to do the auto configuration process yet. I followed the analogy of the Yealink as close as possible but obviously, something must be a bit different. Can we get a small procedure as we did for the Yealink?

Link to comment
Share on other sites

Hi,

 

I upgraded the version recently. It looks pretty well. Please advise, how to setup logs for inbound/outbound calls IP recognizing (in "Call Log" menu). It was possible to add IP in v.5.0.10 with pop-up, but, I can't find here.

Link to comment
Share on other sites

I upgraded the version recently. It looks pretty well. Please advise, how to setup logs for inbound/outbound calls IP recognizing (in "Call Log" menu). It was possible to add IP in v.5.0.10 with pop-up, but, I can't find here.

 

You mean that the call logs show the IP addresses of the involved parties?

Link to comment
Share on other sites

The Internet Explorer 9 (IE) does not show some WEB pages of snomONE v.5.1.0 (i.e. "Current Domains"; "Call Log"; "IP Access Control" and etc.) Please advise where should I kick the IE to show correctly everything. Thank you.

 

Yea. IE9 does not support websocket. As far as I know there are so many problems with IE9 that also Microsoft recommends to upgrade to IE10.

Link to comment
Share on other sites

 

Yea. IE9 does not support websocket. As far as I know there are so many problems with IE9 that also Microsoft recommends to upgrade to IE10.

Oh, thank you for the answer.

But, you know, IE10 has much more issues than IE9; and does not show some pbx snom web pages as well. I am using another browser. Thank you.

Link to comment
Share on other sites

But, you know, IE10 has much more issues than IE9; and does not show some pbx snom web pages as well. I am using another browser. Thank you.

 

Well, if you want to use WebRTC you currently have to use Chrome anyway (we are working on Mozilla support). IE WebRTC support does not seem to be available too soon.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...