Nijin Narayanan Posted February 12, 2014 Report Share Posted February 12, 2014 We have IP authenticated SIP Strunk with 5 DID Number. How do i configure this SIP trunk on snomone ? & How to handle Outboud & incoming Calls ? I have created SIP trunk with following config: Type: SIP Proxy Proxy Address: SIP trunk IP Address IP Routing List: 172.31.0.0/255.255.0.0/172.31.13.89 0.0.0.0/0.0.0.0/Public_Static_IP Any settings needed to work this SIP trunk ? All the Extensions are configued remote location. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted February 12, 2014 Report Share Posted February 12, 2014 For that I would choose the gateway mode. You can also explicitly list the IP addresses where the trunk sends SIP packets from, if they should be different than the outbound proxy address. The IP replacement will work only if your firewall is configured accordingly. Inbound packets to port 5060 must be forwarded to the host (172.31.13.89). Quote Link to comment Share on other sites More sharing options...
Nijin Narayanan Posted February 12, 2014 Author Report Share Posted February 12, 2014 As i said we have 5 DID number in SIP trunk. So how do i handle incoming call ? Incoming call to each DID should ring respective extension. Quote Link to comment Share on other sites More sharing options...
Vodia support Posted February 12, 2014 Report Share Posted February 12, 2014 Please check this article on incoming calls. http://wiki.snomone.com/index.php?title=Inbound_Calls Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.