BILLY77 Posted July 9, 2015 Report Share Posted July 9, 2015 Hi, Please can someone assist me here. When i send outgoing calls via my Quescom GW all is fine but when sending same outgoing calls via my GOIP 32 GW i get "503 Service Unavailable" causing almost all the calls to fail. What is the root cause of "503 Service Unavailable" in GOIP GSM Gateway? Meanwhile am using the GW in "Trunk Gateway Mode" with each channel Prefixed and Dial Plan setup to stripe the outgoing numbers Prefixes. This normally occurs when i have more than 100 numbers set to be called out. I will appreciate any suggestion. Thank you BILLY Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted July 10, 2015 Report Share Posted July 10, 2015 Really hard to say from the PBX perspective. There must be some kind of log on the gateway that talks about the why and when, and that can give you a clue. Quote Link to comment Share on other sites More sharing options...
BILLY77 Posted July 11, 2015 Author Report Share Posted July 11, 2015 Thank you for your reply. Could it be that the gateway is overloaded because the softswitch send another new call to any of the 32 channels that ends the last call becomes available again. As soon as a channel drops the last call within 1 second (same time) another call is placed by the softswitch on such channel(s). Can this result in overload to the gateway? I feel its should take at least 5 seconds from ending the last call before another can be placed on such free channel to enable the channel to be ready to take new call? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.