kangoo
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by kangoo
-
-
Hello,
the problem is solved now. I saw in the log, that the ITSP cancled the call after 15 seconds. Now it works fine.
Thanks to all.
Regards Kangoo
-
Hello,
NOT solved. 4 times ringing and hang up. No hunt group or something else. In the log I find this:
[5] 2011/07/22 08:26:24: INVITE Response 487 Request Terminated: Terminate b71436b9@pbx
[8] 2011/07/22 08:26:24: Hangup: Call 0 not found
Regards
Kangoo
-
Hello,
I created the extension 70 as manual Auto Attendant and recordet my message.
Then I created an Redirect on a Service Button of a Snom 320 (extension of Snom 320 is 40).
Now when I activate the redirection on the Snom and make a call from outside to extension 40 the call will be forwarded to the Auto Attendant and I hear the message.
But when the message has ended the Auto Attenden will not hang up.
Regards
Kangoo
-
Hi,
it seems that the problem is solved. It was the hunt group.
Thank´s
Kangoo
-
Hello,
when somone from outside call an extension this call stop after a short period of time (3 times ringing).
Where is the mistake? I am not able to find out what happens.
Kind regards
Kangoo
-
SOLVED!!!
Hello,
how can I forward calls e.g to extension 500 automatically from these extensions which are busy or dont take the call after 20 seconds.
regards
Kangoo
-
Ok. But what I have to do? If user make a call they have to use the 0.
My simple dial plan looks like this:
100 trunk 0*
100 trunk 00*
100 trunk 000*
100 call extension [1-9]
kind regards
Kangoo
-
Hello,
my dial plan allows outbound calls if my useres dial a 0 in front of each number. Now the problem is, that all incoming calls do not have the 0 in front of it and the users can not make a direct call back.
How can i set a 0 in front of each incomin call? In the "send call to extension" field i have this !([0-9]{2}$)!\1!t!500!
And please no discussion about the 0 in front of. We need this.
Thanks and kind regards
Kangoo
Out of office
in Auto Attendant Setup
Posted
@ pbx support
now it works fine.
thanks to all
regards
kangoo