Jump to content

Harlow Tech

Members
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

 Content Type 

Posts posted by Harlow Tech

  1. Join.me SIP Access

    in General Setup

    Posted

    I was trying to setup a trunk and dial plan to dial a SIP URI directly, similar to what was described at http://forum.vodia.com/index.php/topic/3215-sip-uri/

     

    Also the join.me link might not be working, not sure what is wrong with their knowledge base tonight (as when I search for, it says 7 found but only shows one article) here is what it had said:

     

    join.me allows customers using an IP PBX, IP phones, or softphone to directly connect to join.me conferencing. The SIP connects directly through the internet and bypasses the traditional telephone network.

    HD Audio

    If your IP device supports High definition audio codec (G.722) you can take advantage of HD Audio quality. This codec is usually incorporated into newer IP phones and conference room equipment.

    SIP Addresses

    12132261066@audio1.join.me

    • (non-encrypted SIP access)
    • No registration required
    • Your nine digit conference ID and four digit PIN act as your authentication
    Embedding the Conference ID

    To bypass the welcome greeting and prompts, use the format below.
    sip:logmein#XXXXXXXXX*YYYY@audio1.join.me

    • (non-encrypted SIP access)
    • XXXXXXXX= 9 digit conference ID
    • YYYY= 4 digit pin code

    Example:
    sip:logmein#123456789*1234@audio1.join.me

    Other supported standards

    join.me supports various standards:

    • RFC 2833 standard for in-band DTMF
    • NAT traversal, STUN (will automatically attempt to configure a quality connection with your device or client)
    • Standard codecs G.711 and G.722

  2. Join.me SIP Access

    in General Setup

    Posted

    I am trying to figure out how to configure and add a trunk, dial plan, and contact in the global contacts that will allow me to direct call the Join.me SIP line so that we can avoid tying up our other trunks and take advantage of the HD audio. They have their information post at http://help.join.me/knowledgebase/articles/580113-join-me-sip-access

     

    I have already tried setting up a trunk as mentioned at outbound but can not seem to get it to work.

     

    Any help would be greatly appreciated.

     

    Thank you -

     

    Daniel

  7. Problem with Skype SIP connection

    in Trunk Setup

    Posted

    The latest version which has been released just before Christmas should have the certificate built-in. If you upgrade, make sure that you delete all certificates from the list of certificates or just remove the whole working directory (at least the certificates directory) from your install before restarting the service.

     

    If you get 404 the problem might be a different one. Maybe you are subscribing to the wrong number. Lets see if we can come up with an updated description on how to connect snom ONE to Skype.

     

    The latest release on http://wiki.snomone.com/index.php?title=Upgrades shows the last one was released in November, is there a new spot I should be looking?

     

    Daniel

×
×
  • Create New...