Jump to content

s.degtyarev

Members
 View Profile  See their activity

  • Posts

    7

  • Joined

  • Last visited

 Content Type 

Posts posted by s.degtyarev

  1. Starting service slow

    in General Setup

    Posted

    Yes you are right. That was ports state TIME_WAIT problem. If you try to start snomeone before ports free you will wait for a long time. You should wat for ports to close before snomeone starts. It take 1-2 minutes. Then snomone starts as usual.

     

    Fast hack to init script for snomone 4 users:

    1c1
< #! /bin/sh
---
> #! /bin/bash
97a98
> 
111a113,119
>       echo "Waiting for port to close"
>           while `nc -zv -w3 127.0.0.1 80 <<< ” &> /dev/null`
>               do
>               echo -ne "."
>               sleep 1
>               done
>               echo 'closed'

  2. Starting service slow

    in General Setup

    Posted

    I'm not sure if http port is free before starting. Will check next time when it's possible.

    snomONE (with its web interface ) stopped with snomONE stop and it takes about 30-50 sec. Earlier it was enough to free http port.

    Anyway no stop process, no restart process, even no server restart helps. The only solution is to wait.

    I will try to strace process when it's possible.

  3. Starting service slow

    in General Setup

    Posted 

    # ls -l ./snomONE-ctrl 
lrwxrwxrwx 1 root root 37 Jul 17  2012 ./snomONE-ctrl -> /usr/local/snomONE/pbxctrl.4.5.0.1090
    #cat /etc/debian_version 
6.0.5
    # uname -a
Linux snomeone 2.6.32-5-686 #1 SMP Sun May 6 04:01:19 UTC 2012 i686 GNU/Linux
    # free
             total       used       free     shared    buffers     cached
Mem:       3924424    3813168     111256          0     255524    2595500
-/+ buffers/cache:     962144    2962280
Swap:      7910392        672    7909720
    # cat /proc/cpuinfo |egrep 'processor|model name'
processor       : 0
model name      : Intel(R) Xeon(R) CPU E31240 @ 3.30GHz
processor       : 1
model name      : Intel(R) Xeon(R) CPU E31240 @ 3.30GHz
processor       : 2
model name      : Intel(R) Xeon(R) CPU E31240 @ 3.30GHz
processor       : 3
model name      : Intel(R) Xeon(R) CPU E31240 @ 3.30GHz
processor       : 4
model name      : Intel(R) Xeon(R) CPU E31240 @ 3.30GHz
processor       : 5
model name      : Intel(R) Xeon(R) CPU E31240 @ 3.30GHz
processor       : 6
model name      : Intel(R) Xeon(R) CPU E31240 @ 3.30GHz
processor       : 7
model name      : Intel(R) Xeon(R) CPU E31240 @ 3.30GHz
    # ls /usr/local/snomONE/users|wc -l
279
    Starting time between /etc/init.d/snomeone start and service accepting connection about 30 minutes.
    During this time
    - no logs created
    - ioactivity of "snomONE-ctrl --dir /usr/local/snomONE/ --config /usr/local/snomONE/pbx.xml" is about 500 KB/s.
    - CPU load low.
    What should you recommend to check?

     

  7. Transfer with BLF vs transfer with numpad

    in Extension Setup

    Posted

    Hello.

     

    Snom 370

    Dialplan configured.

    Transfer on Onhook ON

     

    When user using TRANSFER + number onhook transfers good.

    When user using TRANSFER + BLF call transfers just after pressing BLF button. Onhook generates transfer and snomeone alerts user with "This function not available at the moment".

     

     

     

    How could I stop this message but keep onhook transfer?

×
×
  • Create New...