[License problem]

Hello,

I recently moved my pbxnsip server to A new server and the PBX now has a license problem, I know the program is depended on the macadres but the network card is an on board card so I can’t transfer the network card.

Where can I ask for 1 new license or is it possible to buy a dongle and what are the costs. Is it possible to run de pbxnsip server in VMware?

 

Thanks.

[Office Communications server trunk problem]

Interesting you ask this. I posted this question & received following answer from Admin.

"Forking calls was supported since version 1.0. Just register an extension twice and they will ring at the same time.

 

I don't know why some people have so many problems with this trivial feature."

 

So while pbxnsip supports forking, UM/OCS apparently does not. Per my OCS expert, OCS will not register with pbxnsip, as endpoint, & you can't have both simultaneously ring. We reasoned that if someone wants to dial a hard phone they dial extension; if they want to connect to another OC client they just choose name. Still exploring PBX Integration field, but he is saying this is used with Cisco to light up MWI lamp on phone. I am exploring SIP server that would broadcast presense of phones via the SIP url to OC.

 

Is your understanding on any of the above different?

 

Regards, Fred

 

Mm this was not the answer I hoping for.

OCS is supporting forking that is the hole purpose of the Server URI with you can set on a per user bases.

Ill wil try to find a solution and if I find something ill post IT here.

Thanks for the help so far

 

Regards, Charl

[Office Communications server trunk problem]

Valerio:

Couple of questions:

What extension did use for Assume that call comes from user?

Are you using Exchange UM Auto Attendant, and if so do you route from your external gateway through pbxnsip

Can you provide contact information so I can bounce my configuration off you?

Thanks, Fred

There is no connection problem I can call someone from the PBXnSIP to OCS and from OCS to PBXnSIP.

But what I want is the when someone calls extension 900 (example) the normal Voip Phone is ringing and the OCS client with extension 900

Ill believe this is known as forking but how can I do that.

I?ll know I?ll have to set the Server URI of the user but what should ill type there?

my address is pbxnsipforum<at>spam.cpels.com

[Office Communications server trunk problem]

Thanks it works

 

The only problem left for me is what I have to type as Server URI to register an OCS user with PBX for incoming calls.

Basically how can I route incoming calls to users?

[Office Communications server trunk problem]

Hello,

 

I am trying to connect a Microsoft Office Communications server to PBXnSip but ran in to a problem with the trunks.

I am using 2 trunks for this setup one to connect to an voip provider with works fine when I am using an normal voip phone etc

The other trunk is for the Microsoft Office Communications server, but when ill try to call an external number using de Office Communicator (Client) pbxNsip gives the following message

 

[5] 2007/10/17 23:19:42: SIP port accept from 10.16.3.38:3566

[5] 2007/10/17 23:19:42: Identify trunk (IP address and domain match) 7

[5] 2007/10/17 23:19:42: Trunk OCS sends call to +31<external number>

[5] 2007/10/17 23:19:42: Trunk call: Could not identify user

 

How can i Fix this? Basically it is an trunk to trunk connection

[Exchange VoiceMail caller-ID]

Hi,

please check the Exchange trunk if you're using TCP transport and set Remote Party/Privacy Indication to RFC3325 (P-Asserted-identity).

 

Hope this helps.

 

Valerio

 

Thanks for this tip, it works perfectly.

This is also a good tip for de wiki site I think

 

http://wiki.pbxnsip.com/index.php/Microsoft_Exchange

Section: Configuring the pbxnsip Server for Exchange.

 

1. Create a new trunk to connect to Exchange: Using the pbxnsip Domain Administrator, select the Trunks tab. Name the new trunk "exchange gateway" and set its type to SIP Gateway. Click the create button. Click the edit icon next to the Exchange Gateway. In the Domain box, enter the FQDN or IP Address of your Exchange Server (i.e., exchange.company.com). In the outbound proxy box, enter: sip:exchange.company.com:5060;transport=tcp but replace exchange.company.com with the FQDN or IP Address of your Exchange Server and set Remote Party/Privacy Indication to RFC3325 (P-Asserted-identity).

The example below assumes the address is 100.200.100.200. Click the "Accept redirect" radio button and then click save.

Screenshot needs an update

[Exchange VoiceMail caller-ID]

Hmm. Maybe that problem is related to the reason for the transfer provided in the Divert header? What does the PBX say in the SIP packet sent to the Exchange?

 

this is the log

 

[5] 2007/10/16 22:26:59: Identify trunk (IP address/port and domain match) 2

[5] 2007/10/16 22:26:59: Trunk Linksys sends call to 900

[5] 2007/10/16 22:27:20: Dialplan: Match 777777@10.16.3.5 to <sip:777@10.16.3.39;user=phone> on trunk Exchange

[5] 2007/10/16 22:27:20: Using <sip:<number of caller>@10.16.3.5>;tag=a2b11b4584f9f748o1 as redirect from

[5] 2007/10/16 22:27:20: Charge user 900 for redirecting calls

[5] 2007/10/16 22:27:20: Opening a new connection

[5] 2007/10/16 22:27:20: Redirecting call

[5] 2007/10/16 22:27:20: Opening a new connection

[5] 2007/10/16 22:27:20: Connection refused on udp:10.16.3.39:5060

[5] 2007/10/16 22:27:27: BYE Response: Terminate d276578b@pbx

[5] 2007/10/16 22:27:43: SIP port accept from 10.16.3.39:1483

 

 

number 900 is my test extension

number 777777 is the numer of the exchange server, the dailplan change this to 777

[Exchange VoiceMail caller-ID]

Hello,

 

I have upgraded my pbxnsip server to version 2.1 and now when a call is send from pbxnsip to my Exchange 2007 voice mail I only see the extension number.

 

Ill use budgetphone as my phone provider and the phonenumer of the caller is visible on my phone like normal.

 

So the phone number of the caller is not passing to Exchange 2007. Exchange is reporting the phone extension/name instead.

 

The voicemail it self etc works fine but how can I Fix this problem?

 

Thanks,

Charl