lionel
-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by lionel
-
-
I'm ok with this.
It's why i've forbidenn G729A codec in my config.
But why i've this type of message in my logs? I don't use this codec.
-
Hi,
i've a lot of message in my log for call state in alerting.
I'm worry, because during certain break communication if i search in the log, this message is associated.
What is this state?
Best regards
-
Hi,
i've many message with call limit reached on my logs.
I've forbiden g729a codec. And i've a trunk with 8 calls. My licence is ok for 10 calls.
I don't understand why i see this type of message
If anyone have an idea. i'm interesting.
Sorry for my poor english.
best regards
-
Ok,
i confirme what i've understood.
For trunk with my provider, i must declare it like a global and accept redirect. Obviously i've one domain.
No risk to be billed by my provider for bad redirection?
-
It was what i don't want to do. Only if i can accept refer only for a list of domain like "fai.fr mydomain etc"
i want not accept abuse refer demand.
-
hi, i've a problem with My sip gateway's provider who use a communigate server.
when i call another phone who use the same provider and the called phone try to transfer call, my snomone receive a refer from communigate like this:
REFER sip:trunk@1.1.1.1:5060;transport=udp;maddr=1.1.1.1 SIP/2.0
Via: SIP/2.0/UDP 2.2.2.2:5060;branch=z9hG4bK927820-jizasgv;cgp=fai.fr;rport
P-CGP-Identity: grp_csctechnique@fai.eu
Max-Forwards: 70
From: <sip:0101010101@myname.fai.eu>;tag=3017C508-247538-F740CEED_jizasgv-7039
To: "0202020202" <sip:trunk@myname.fai.eu>;tag=8371
Call-ID: 1fbd8d80@pbx
Contact: <sip:signode-247538-F740CEED_jizasgv-7039@2.2.2.2>from communigate
CSeq: 1 REFER
Refer-To: <sip:fwd_grp_csctechdebordement@fai.eu>
Referred-By: <sip:0101010101@myname.fai.eu>;tag=3017C508-247538-F740CEED_jizasgv-7039
User-Agent: CommuniGatePro-callLeg/5.4.3
Refer-Cookie: 0
Content-Length: 0
[9] 20130708154717: Resolve 69689: aaaa udp 2.2.2.2 5060
[9] 20130708154717: Resolve 69689: a udp 2.2.2.2 5060
[9] 20130708154717: Resolve 69689: udp 2.2.2.2 5060
[5] 20130708154717: SIP Tx udp:2.2.2.2:5060:
SIP/2.0 202 Accepted
Via: SIP/2.0/UDP 2.2.2.2:5060;branch=z9hG4bK927820-jizasgv;cgp=fai.fr;rport=5060
From: <sip:0101010101@myname.fai.eu>;tag=3017C508-247538-F740CEED_jizasgv-7039
To: "0202020202" <sip:trunk@mayname.fai.eu>;tag=8371
Call-ID: 1fbd8d80@pbx
CSeq: 1 REFER
Contact: <sip:trunk@1.1.1.1:5060;transport=udp>
User-Agent: snomONE/5.0.5
Content-Length: 0But my snomone refuse this transfer and the communication close.
I've this message from my snomone juste after the previous REFER message.
[5] 20130708154717: Redirecting call to fwd_grp_csctechdebordement
[5] 20130708154717: REFER without a valid extension is not accepted on trunk 2 28
[8] 20130708154717: call port 316: state code from 200 to 486
[9] 20130708154717: Resolve 69690: url sip:2.2.2.2:5060;lr
[9] 20130708154717: Resolve 69690: udp 2.2.2.2 5060
[5] 20130708154717: SIP Tx udp:2.2.2.2:5060:
BYE sip:signode-247538-F740CEED_jizasgv-7039@2.2.2.2 SIP/2.0
Via: SIP/2.0/UDP 1.1.1.1:5060;branch=z9hG4bK-63aaa6edf966bb591d41b190f31c54ba;rport
Route: <sip:2.2.2.2:5060;lr>
Route: <sip:1.1.1.2:5060;lr>
Route: <sip:41051517-1.1.1.2.dialog.cgatepro;lr>
From: "0202020202" <sip:trunk@myname.fai.eu>;tag=8371
To: <sip:0101010101@myname.fai.eu>;tag=3017C508-247538-F740CEED_jizasgv-7039
Call-ID: 1fbd8d80@pbx
CSeq: 12281 BYE
Max-Forwards: 70
Contact: <sip:trunk@1.1.1.1:5060;transport=udp>
P-Asserted-Identity: "trunk name" <sip:trunk@myname.fai.eu>
Remote-Party-ID: "lastname firstname" <sip:0202020202@pbx2.mydomain;user=phone>
P-Charging-Vector: icid-value=;icid-generated-at=178.255.164.213;orig-ioi=pbx2.mydomain
Authorization: Digest realm="fai.fr",nonce="243F307A82B9FB4F930B",response="7309a8112abbd0ae48c3c633df1ce1f5",username="trunk",uri="sip:signode-247538-F740CEED_jizasgv-7039@2.2.2.2",qop="auth",nc=00000003,cnonce="a71d51c5",opaque="opaq",algorithm=MD5
Content-Length: 0My provider can't change his configuration. How can modify snomone to resolve this problem. I don't want to allow tranfer on my trunk, or olny for one domain name like "fai.fr."
Best regards
-
I think the change to use the MAC address in all configurations might have caused the issue.
Sorry
i don't understand what you want to explain me
i've tested with the attached file paste in a folder html that i ve created but the problem is the same
only the last extension is set
can you give me the good process to provision multi-account on m9r?
-
Hmm.. What is the Provisioning Server? And the HTTP Client User and Password?
The provisionning server is my snomone: http://ipbxaddress/prov/snom-m9-macaddres.xml
the base and the server is on the same lan, no dhcp configure, no broadcast pnp.
i tried with the first extension as http client, and without information in http client
on my configuration who works with a snomone v5.0.5, it's ok without http client in security parmaters of m9r
-
Can you check the generated folder in the working directory of the PBX if those 4 extensions were actually provisioned into the m9? In theory, they should show up in the snom_m9_settings.xml file.
on the v 5.0.5 there's for each extension a generated file who have the 4 extensions idx1, idx2, etc
on the v 5.0.10a there's a generated file only for the last extension who has the mac adress bind, and thre's only his extension set in xml file
-
Hi,
i've configure mac address of my base on 4 extensions on my snomone, but only one extension is set automaticaly as first identity on m9r base. How can set automaticaly the 3 others?
all other parameters of provisionning are ok on the base.
with snomone v5.0.5, i've not this problem.
i think, there's a problem with the generated files on v 5.0.10a who have only the last extension with mac adress binded and not the 3 others.
-
Thanks for answer.
I would check the new version as soon as the language package will also be in version 5.0.4.
Maybe you can let old link for version 5.0.3. it will be easier for other user.
Best regards
-
Hi,
i've installed the new version 5.0.4, but i can't change blank adim password.
When i look to logfile, i can read admin password change. I test logout, restart, stop and start. But i can't change this default blanck password.
I've tested this on windows xp (x86) and w7 (x64). It's the same problem.
I've testes too with ie and firefox. With ie i've many debug windows when i use it. With firefox, no problem, except the admin password who doesn't want to change.
I hope someone can explain this to me.
EDIT:
the problem is due to a bug for v5.0.4, i test with v5.0.3 and i've not the problem
another pb: langage prompt links are for v5.0.3 and cause a update error with v5.0.4
maybe snom can test a little more his version before to do online version..
Call state for call object XX: alerting - where XX is a number
in General Setup
Posted
Ok i'm trying this.