[Calls from Tunk]

Hello,

 

We have configured Trunk for incoming to PBXnSIP calls. This trunk configured with options "Send call to extension: 111" and "SIP Gateway". When call arrives from this Trunk - PBXnSIP connect the call with IVR Node 111. Working well.

 

But I don't see this calls in Status -> Call Log..

Also nothing in CDR...

 

 

Advice please where to look.

[zero out of IVR]

You can handle timeouts in IVR nodes: http://wiki.pbxnsip.com/index.php/IVR_Node (just updated).

 

So - just enter a timeout value and use the pattern "!T!123!" in the DTMF Match List if you want to redirect the call to 123.

 

Thanks a lot!

[zero out of IVR]

Well you should be able to have a pattern that matches the 0 and then redirect you to another account... Would that solve the problem?

 

I am also trying to use IVR node. The same, IVR node repeat the prompt and repeat when user don't enter the digit. How to disconnect the call or redirect this call to another extension when user do not pressed any digit? Have you simple example?

Thanks.

[TimeZone]

The question is if the DST dates are the same like in CET. Of course, the offset from GMT is different.

 

Exactly, DST like in CET. This feature can be done in next releases?

[TimeZone]

Sounds like central european time, just two hours ahead? If that is so, it should be a piece of cake.

 

No. Moscow time is GMT+3 with DST.

[TimeZone]

Does Moscow have daylight settings?

 

Yes.

 

Russia

Start: Last Sunday in March at 2 am local time

End: Last Sunday in October at 2 am local time

[TimeZone]

Check out http://wiki.pbxnsip.com/index.php/Localization#Time_Zones - if you have a time zone that we should include in the standard distribution we are happy to put it in!

 

It would be great if GMT+3 (Russia, Moscow) timezone will be implemented in new releases..

[TimeZone]

Hello!

 

Please advice how to adjust timezone (to set GMT +3) when there is no timezone like this in Default Values -> Timezone... ?

 

Thanks.

[Calling Card access via AutoAttendant]

I tryed both ways: with enabled dial plan for Calling Card and using default Dial plan for domain. Result the same: Calling Card do not understand my phone number input.

But imput of user id and password PBXnSIP recognize as well.

[Calling Card access via AutoAttendant]

No, I called from other phone numbers. I did'nt tryed co configure cell phone number in the extension. Should I do that?

I think that PIN and password in the extension should give me possibility to make calls over Calling Card serivce from any phone.

[Calling Card access via AutoAttendant]

Hi!

 

I have already configured Calling Card service. When I call to Calling Card service extension from ip-phone registered on PBXnSIP - everything is ok.

CC answering me, I dial extension number, password, and phone number to call. Conversation success.

 

 

But when I try to reach CC from PSTN, there is problems...

 

Call flow:

PSTN ----E1-->Gateway---SIP-->PBXnSIP (AA).

 

When AA answering I dial CC extensoin. Hear "enter you account number, password", it's ok, entering. But when I try to enter phone number - happens something strange. I see in the trace that pbxnsip recognize my input, but call to dialed number not happes.

 

Advice please where to look.

 

Version: 2.1.0.2115 (Win32)