positive

July 26, 2011

Thank You Matt !

I finally mixed configuration files (comming from 3CX conf) and it works fine now !

here it is :

- Replace PATTON_IP and SNOM_ONE_IP..

- PATTON SIDE : no use of WAN and S0

- SNOM_ONE side : I put the option "RINGBACK : MESSAGE 180" in the trunks

#----------------------------------------------------------------#

# #

# SN4552/2BIS/EUI #

# R5.3 2009-09-14 SIP #

# 2011-07-20T12:11:45 #

# SN/00A0BA028A7F #

# Generated configuration file #

# #

#----------------------------------------------------------------#

cli version 3.20

clock local offset +02:00

webserver port 80 language en

sntp-client

sntp-client server primary 79.120.83.33 port 123 version 4

system

ic voice 0

profile ppp default

profile call-progress-tone defaultDialtone

play 1 1000 440 0

profile call-progress-tone defaultAlertingtone

play 1 1500 440 -7

pause 2 3500

profile call-progress-tone defaultBusytone

play 1 500 440 -7

pause 2 500

profile tone-set default

profile voip default

codec 1 g711alaw64k rx-length 20 tx-length 20

codec 2 g711ulaw64k rx-length 20 tx-length 20

fax transmission 1 relay t38-udp

profile pstn default

profile sip default

profile aaa default

method 1 local

method 2 none

context ip router

interface IF_IP_WAN

ipaddress dhcp

tcp adjust-mss rx mtu

tcp adjust-mss tx mtu

interface IF_IP_LAN

ipaddress PATTON_IP 255.255.255.0

tcp adjust-mss rx mtu

tcp adjust-mss tx mtu

context cs switch

national-prefix 0

routing-table called-e164 RT_ISDN_TO_SIP_0

route T2 dest-interface IF_SIP_0 MAPPING_INCOMING_CALLS

mapping-table calling-pi to calling-e164 MAP_REMOVE_BLANK_CALLERID

map restricted to ""

mapping-table calling-e164 to calling-e164 MAP_LEADING_ZERO

map (.%)-(.%)-(.%)-(.%)-(.%) to \1\2\3\4\5

map (.%)-(.%)-(.%)-(.%) to \1\2\3\4

map (.%)-(.%)-(.%) to \1\2\3

map (.%)-(.%) to \1\2

mapping-table calling-e164 to calling-name MAP_CID_TO_CNAME

map (.%) to \1

complex-function MAPPING_INCOMING_CALLS

execute 1 MAP_REMOVE_BLANK_CALLERID

execute 2 MAP_LEADING_ZERO

interface isdn IF_ISDN_0

route call dest-table RT_ISDN_TO_SIP_0

call-hold disable

caller-name

user-side-ringback-tone

interface sip IF_SIP_0

bind context sip-gateway GW_SIP_0

route call dest-interface IF_ISDN_0

remote SNOM_ONE_IP

early-connect

early-disconnect

address-translation outgoing-call request-uri user-part fix 10001 host-part to-header target-param none

context cs switch

no shutdown

authentication-service AS_ALL_LINES

realm 1 3CXPhoneSystem

username 10001 password XXXXXXXXXXXXXXXXX== encrypted

location-service LS_10001

domain 1 SNOM_ONE_IP

identity-group default

authentication outbound

authenticate 1 authentication-service AS_ALL_LINES username 10001

identity 10001

authentication outbound

authenticate 1 authentication-service AS_ALL_LINES

registration outbound

registrar SNOM_ONE_IP 5062

lifetime 300

register auto

context sip-gateway GW_SIP_0

interface LAN

bind interface IF_IP_LAN context router port 5062

context sip-gateway GW_SIP_0

bind location-service LS_10001

no shutdown

port ethernet 0 0

encapsulation ip

bind interface IF_IP_WAN router

no shutdown

port ethernet 0 1

encapsulation ip

bind interface IF_IP_LAN router

no shutdown

port bri 0 0

clock auto

encapsulation q921

q921

protocol pp

uni-side auto

encapsulation q931

q931

protocol dss1

uni-side user

bchan-number-order ascending

encapsulation cc-isdn

bind interface IF_ISDN_0 switch

port bri 0 0

no shutdown

port bri 0 1

clock auto

encapsulation q921

q921

uni-side auto

encapsulation q931

q931

protocol dss1

uni-side net

bchan-number-order ascending

port bri 0 1

shutdown

#-------------- END ------------------

July 18, 2011

Hello,

It's better now ! I found myself how to get the calls from the isdn to redirect them to the snom one but I have 2 problems : the incomming call rings 1 time and is lost (if I take the phone before, the communication is OK..) and the number loose its first digit(0)..

any idea ? thank you for anyone !

here is the config file Patton 4552 (Hardware Version 2.1, Software Version R5.3)

#----------------------------------------------------------------#

# #

# SN4552/2BIS/EUI #

# R5.3 2009-09-14 SIP #

# 2011-07-18T19:31:24 #

# SN/00A0BA028A7F #

# Generated configuration file #

# #

#----------------------------------------------------------------#

cli version 3.20

dns-client server 192.168.0.1

dns-relay

webserver port 80 language en

sntp-client

sntp-client server primary europe.pool.ntp.org port 123 version 4

system

ic voice 0

profile ppp default

profile tone-set default

profile voip default

codec 1 g711alaw64k rx-length 20 tx-length 20

codec 2 g729 rx-length 20 tx-length 20

dtmf-relay rtp

fax transmission 1 relay t38-udp

profile pstn default

profile sip default

profile aaa default

method 1 local

method 2 none

context ip router

interface IF_LAN

ipaddress 192.168.0.211 255.255.255.0

tcp adjust-mss rx mtu

tcp adjust-mss tx mtu

context ip router

route 0.0.0.0 0.0.0.0 192.168.0.1 0

context cs switch

routing-table called-e164 RT_TO_NETWORK

route .T2 dest-service SER_HG_TO_NETWORK

routing-table called-e164 RT_TO_PBX

route default none

route [1-9].% dest-service SER_HG_TO_PBX

interface isdn IF_ISDN_00

route call dest-interface IF_SIP_VOIPVOICE

interface isdn IF_ISDN_01

route call dest-table RT_TO_NETWORK

interface sip IF_SIP_VOIPVOICE

bind context sip-gateway GW_SIP

route call dest-table RT_TO_PBX

remote 192.168.0.240

local 192.168.0.240

privacy

service hunt-group SER_HG_TO_NETWORK

route call 1 dest-interface IF_SIP_VOIPVOICE

route call 2 dest-interface IF_ISDN_00

service hunt-group SER_HG_TO_PBX

route call 1 dest-interface IF_ISDN_01

context cs switch

no shutdown

location-service SER_LOC_VOIPVOICE

domain 1 192.168.0.240

context sip-gateway GW_SIP

interface IF_LAN

bind interface IF_LAN context router port 5062

context sip-gateway GW_SIP

bind location-service SER_LOC_VOIPVOICE

no shutdown

port ethernet 0 0

encapsulation ip

no shutdown

port ethernet 0 1

encapsulation ip

bind interface IF_LAN router

no shutdown

port bri 0 0

clock slave

encapsulation q921

q921

permanent-layer2

uni-side user

encapsulation q931

q931

protocol dss1

uni-side user

bchan-number-order ascending

encapsulation cc-isdn

bind interface IF_ISDN_00 switch

port bri 0 0

no shutdown

port bri 0 1

clock auto

encapsulation q921

q921

permanent-layer2

protocol pp

uni-side net

encapsulation q931

q931

protocol dss1

uni-side net

bchan-number-order ascending

encapsulation cc-isdn

bind interface IF_ISDN_01 switch

port bri 0 1

no shutdown

#---------------- END ---------------------------------

July 17, 2011

Hello,

I'm a newbee with Patton 4552 ISDN Gateway.

I tried to configure a Patton 4552 (R5.3) but without success..

I tried an xls file (SN_VoipVoice_Configuration_Tool.xls provided by Patton) to make a configuration file but this is not the result I need.

I use this Gateway to connect an ISDN line (T0) to a SNOM ONE, I already have a modem/router on the network and I use the Snom One SIP Trunk for outgoing calls.(so I don't use WAN or ETH0/0 connector on the Gateway).

I need to redirect all the incoming calls to the Snom ONE.

I have another trunk "PATTON GW" on the Snom ONE (inbound & outbound) and I need the numbers beginning with '1' to go to that Gateway and the ISDN network.

I need also to connect an ISDN phone to Phone connector (BRI0/1) in case the SIP trunk or the Snom One is down..

Thank you for helping me!

Regards

Patrick

October 31, 2010

Hello,

I want to begin with Snom One and I'd like to know what gateway can I use to connect PSTN and ISDN.. (one or two gateways at the same time)

Thank you

Sign In

positive

Posts

Joined

Last visited

Content Type

Profiles

Forums

Events

Posts posted by positive

Conf Patton 4552 with Snom One

Conf Patton 4552 with Snom One

Conf Patton 4552 with Snom One

Compatible PSTN and ISDN gateway

Browse

Activity