Gunny

Hi, there are some news? We would use pbxnsip in production..... :-) Giorgio.

Yes, I set Inband detection to ON. In my wireshark file, why I don't get "[6] Received DTMF F"....... I'm a software developer.... so I REALLY don't understand, if the PBX receive the DTMF (as wireshark show)... why the software didn't understand the tone? ... if tone=xxxx then DTMF ..... ;-) My provider switch ALL THE TONE..... and wireshark show that. My test with zoiper was not on the lan, the Zoiper that SEND the fax was connectet directly to the sip provider. We would sell to our customers (we are voip provider) something like "unique number", so the customer can receive fax and call on ONE number, but if the pbx didn't get the fax tone I can't switch the call to a fax extension and pbxnsip become a "normal" pbx. Thanks, Giorgio PS I send you also a private e-mail...

Yes, the dtmf_gain is set to 512. The first test was on IVR, now we test on AutoAttendant. There is always the problem. We do other tests: - install ZOIPER under pbxnsip (ext 190) - install ZOIPER on my PC in OTHER LAN than Pbx, logged DIRECTLY on the provider, this only to try send fax. - PBX redirect ALL the incoming call to ZOIPER (190) - If we send a fax with a STANDARD FAX, zoiper didn't recognize that it's fax - If we send a fax with the ZOIPER client on my PC, zoiper recognize that it's fax With the Standard fax, we try with: - VOIP line - Telecom line - External service none works...... What could be? Why your detector works? ...? :-) Giorgio

I send the mail, could you confirm that arrives? .... it's the first mail from the forum.... Thanks. Giorgio.

Thanks for the reply. ... no, I don't see "received dtmf f", i get only: [9] 20081021125333: DTMF: Power: 0 0 2 0 2 0 0 1 0 [9] 20081021125333: DTMF: Power: 1 2 0 0 0 2 0 0 1 [9] 20081021125333: DTMF: Power: 0 0 0 0 0 0 1 1 1 [9] 20081021125333: DTMF: Power: 0 2 0 0 0 2 0 0 1 ......... but nothing marked as "[6] received"....... I try also a call between 2 extensions (2 sip phone, snom and grandstream), once the call is established, I send a DTMF (only to try...), in the log i get the same messages, nothing like [6]...., only [9]..... Giorgio

Hi all, I create an IVR node with DTMF match list = !F!201! !T!250! When a call arrives, if is a FAX, go to 201, else go to 250. If I send a fax, the rule doesn't work, the call always go to 250. What's wrong? There is something that I need to know? Thanks in advance. Giorgio.