Nathan Posted March 15, 2011 Report Share Posted March 15, 2011 I set up the MP118 and out bound calls work just fine but in bound calls fail it says no route. I tried several different ways of setting up the incomming call routing from different toppics but none seem to be right. is there a tutorial out there about how to set this up so that a call goes from one of the pots lines to the snomone trunk number? Thanks ok now i have the snomone getting the call from the fxo to ip but it says call from account 201: not an extension. then after that Received incoming call without trunk information and user has not been found. then SIP Tx udp:172.16.20.32:5060: SIP/2.0 404 Not Found Via: SIP/2.0/UDP 172.16.20.32;branch=z9hG4bKac1680493678 From: <sip:firstname.lastname@example.org>;tag=1c1680489795 To: <sip:email@example.com>;tag=d46a52178e Call-ID: firstname.lastname@example.org CSeq: 1 INVITE Contact: <sip:email@example.com:5060> Supported: 100rel, replaces, norefersub Allow-Events: refer Allow: INVITE, ACK, CANCEL, BYE, REFER, PRACK, INFO, UPDATE Accept: application/sdp User-Agent: snom-PBX/2011-22.214.171.12481 Content-Length: 0 any help? Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.