MarkW S7
-
Posts
28 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by MarkW S7
-
-
I know this is more of a hardware issue and unrelated to PBXnSIP's side of things, but I need to make a ringer louder.
I have a customer that has a P550 in a loud environment: Bar. They can't hear the phone ring during hectic times. Anyone know of a way to boost the ringer louder? I've contemplated getting a sip page horn with nightbell, but I've not had the chance to work with one yet.
Any ideas?
Thanks
-
We are seeing a ton of SUBSCRIBE's from only our Polycom customers and it's consuming a TON of CPU resources. Is anyone aware of a bug? We run pbx version 3.3 and the latest Polycom firmware. Any thoughts on how to reduce this?
This was addressed in a fix to the PBX and is no longer an issue. I just was clarifying that this is complete.
-
Yea faxback.com is beta testing these new ATA's. I will have a unit next week. the fax is received on the ATA and sent HTTPS to the faxback server.
who would have thought TCP faxing.. hello
We're also doing the Faxback as well. Personally I am excited about the inclusion of the software on the AC202's instead of using the FMIS software. Windows updates kills the service continuously as you probably have encountered.
I currently have great success with T.38 faxing using both Audio Codes 20x and also Linksys SPA2102. We prefer not to do T.38 faxing to free up call overall capacity.
-
Are we able to force Authentication though?
-
Nevermind. I figured it out solo.
-
I use diff SIP passwords across all account
all he did was change the proxy and extension number, and was able to place and receive calls as that extension
Hmm. Sounds like he's not getting authenticated and just passing calls. This is definitely a question for the for our admins. I've always been curious if we can force authentication on our subscribers without the using MAC addresses. In the meantime try locking up the interface and charging a technical fee
with a notice of potential fraud 
. -
I have a Snom 370 utilizing two park orbits on buttons 1 (ext 973) and 2 (ext 974). When on an active call there's a few things I'd like to see different or have explained.
1. On an active call I press Park 1, the IVR then says "Your call has been parked on orbit 973" and then parks disconnects. The screen shows *85973.
- Can I remove the Park Orbit notification?
- Can I not have the star code shown? (this is a very minor question and not a complaint)
2. When I want to retrieve a call that is on one of the park orbits I press the Park 1 Button.
- The caller id for the active call shows *601111539 (retrieved park id?) This is confusing my customer's receptionists. Can this be modified or removed?
If it helps these park orbits are set up as standard extension accounts with the mailbox enabled as park orbit. Also the extension accounts have the "Explicitly specify park orbit preference" listing both orbits and the "Explicitly specify pickup preference" listing both orbits in attempt to address the above items.
Thanks for any help or advice
-wheezey
-
So now on to my 960 Service Flag configuration.
Mode: Day/Night
Monday: 00:00-7:30 17:30-23:59
(repeated Wed-Thur)
Friday: 00:00-7:30 17:30-23:59
Here's a simplified question. The time that is listed in the fields, are these times when the flag is active or inactive? It would be much easier if the time was listed as inactive as it could input the business hours and not have to start at 00:001 and end at 23:59...
Thanks
-wheezey
-
he is not changing password, only user name and domain name
Have you locked the admin interface? To password protect the admin login along with the user login; you can change it's password in the Voice//System page. I also recommend having the spa2102 only accessible on a different http port besides 80. I put my ATA's on a separate port for security and also for remote management if we have the ability to change/request the NAT rules.
If this end user is changing his login user id settings along with his proxy address and you use the same SIP password across your accounts, then he's just registering with ease. I'm not sure if you can set up a authentication challenge for these ATA's with pbxnsip. My recommendation is lock down those interfaces if not only the admin access.
Also I'd recommend putting a "1" in the Lines field of the registration page of the account's settings on the PBX. I'd recommend putting in the MAC address in the registration page also, but note that if that ATA ever changes you'll need to update that setting or face some negative results.
-
I'll explain my call flow:
Hunt Group
Stage1: extensions 12sec
Final Stage: 900 (Main AA)
Service Flag: 960
Service Flag Number: 900
The goal is to have calls ring extensions in the hunt group during business hours 07:30-17:30. Outside of those hours I want the calls to automaticly route past the hunt group's extensions to the AA directly.
So now on to my 960 Service Flag configuration.
Mode: Day/Night
Monday: 00:00-7:30 17:30-23:59
(repeated Wed-Thur)
Friday: 00:00-7:30 17:30-23:59
I feel like I'm going about this backwards, but is this the proper set up for this?
Thanks in advance
-wheezey
-
We are seeing a ton of SUBSCRIBE's from only our Polycom customers and it's consuming a TON of CPU resources. Is anyone aware of a bug? We run pbx version 3.3 and the latest Polycom firmware. Any thoughts on how to reduce this?
-
Ok here's what I would love if possible:
Call comes into our AA. Caller presses whatever option that takes them to our support queue.The support queue has 5 accounts in it all ring simultaneously for the entire duration of the caller waiting in the queue. After a certain amount of time let us say 30 seconds, We would like it to include our on call techs' cell phones. So caller here's nice Agent group music with looping statement while all support handset ring and two cell phone are now able to answer. If no accounts or even the added cell's don't answer then the agent group fails out to a voice mail account.
Any ideas? I've been trying many different combination's with ring durations, hunt groups, etc.. This call flow would be used in my office so if it can't be done than it's "ok".
-
Going ahead and making a thread for these devices. If anyone has any questions regarding these let me know and I'd be more than happy to share.
Linksys SPA8000
This is an 8 fxs port ATA (Analog Terminal Adapter or Analog Telephone Adapter). You can either connect the lines through the fxs ports or through a RJ-21 (50-pin telco connector). That is great if you want to maintain the carrier demarc style cross connect. Beyond the physical connections, internally the spa8000 offers a whole host of great features and flexible voip settings including offering 4 internal trunks. One huge advantage that I feel that this and the spa2102 have over other ATA (like the Budget Tone or Audio Codes MP's) is that each configurable line is proxy independent. What I mean by this is Line 1 can talk to a completely different proxy or outbound proxy from Line 2. Think of the possibilities in redundancy carriers, a bridge between 2 domains, etc.. The only major thing to note about these devices is that they can only run in a LAN/Host mode, and not as the gateway/router like it's brother the SPA2102
Linksys SPA 2102
This device uses the same OS that the SPA8000 uses and has almost the exact same functionality and features. The main difference is that the 2102 can run as a basic router with dhcp, nat, and limited QoS. Other differences include: 2 fxs ports, device can be set up as a switch and not a router, no trunking features.
Both devices support t.38, adjustable DTMF mode/methods, a whole slew of settings that would clutter this board very quickly.
-
Silence on the active call as the CW caller is calling in
If I am on the phone (using the Audio Codes) and I get another call coming in, I won’t hear the person I was talking to for a few seconds (its right after I hear a tone letting me know I have a call waiting, and its until I hear the 2nd tone letting me know I have a call waiting)
Looks like I have a new customer that will be using the new Audio Codes MP-204 B 4FXS (running 2.6.4_p5_1_build_9) so I can get some lab bench time in. Now this device is almost identical to other audio codes device except of course the additional FXS ports. I've reg'd two accounts (one was for duplication testing) to the mp204 and hooked a plain $10 analog handset to the "line 1" port. I have the CW setting in the Services section checked as enabled and the Call Waiting SIP Reply as Ringing
I initiated a call to my cell from the analog handset, and then during that active call I dialed in from another phone. The analog handset gave me a CW tone (during this tone all audio is interrupted; like normal) but immediately after the tone, both the analog handset and my cell pass audio just fine even with additional tones (not during tone but after). I did the same thing with the "line 2" account. I cool thing to note is that when I hit flash the first call gets MoH.
I'm trying the Call Waiting SIP Reply as queued and then will also try changing the signaling to connect media on 180.
-
Mod Staff, could this topic be moved to the new ATA subforum in VoIP Phones? Thanks.
-
If you don't mind which version of WavePad do you utilize? Also if you don't mind me asking, are you onsite installations, or a hosted setup like myself? The reason I ask is that our customers are wanting unique MoH's, but of course all that streaming from our core PBX out to the clients can be taxing to the system and network. If your a hosted system how do you go about the MoH?
The settings are working! Thanks.
-
We would like to use the MP20x for faxing and for using plain old cordless phones with the PBX
we have the MP203B for use with faxing
and the MP202 for the cordless phone, unless if a MP202 can be used with faxing as well
you seem to be a Audio Codes Expert!
Expertise based off of immediate and pressured requests from customers
. Actually though, I'm more familiar with the Linksys SPA ATA's and PAP2's. I recommend giving the SPA8000 and SPA2102 a shot. I know for certain that the SPA2102's handle t.38 very well (except we did encounter a signaling issue with a Sangoma media gateway at one point).Anyhow, what f/w are you running the audio codes MP202 in? I haven't used the MP203 yet.
-
Silence on the active call as the CW caller is calling in
If I am on the phone (using the Audio Codes) and I get another call coming in, I won’t hear the person I was talking to for a few seconds (its right after I hear a tone letting me know I have a call waiting, and its until I hear the 2nd tone letting me know I have a call waiting)
I'm wondering if I need to play with the 180 Ring or 182 Queued on this. I'll fiddle with this some today if I can. We don't generally mess with CW since almost all of our FXS users are either integrated lines into analog phone systems or for faxing.
-
It worked excellent!
Now how do we correct the issue that when call waiting comes in, there is silence for 5 - 7 seconds
Where does the silence occur? Are you describing a one way audio issue, a pause in audio after the user has flashed over to the CW caller for both parties, or silence on the active call as the CW caller is calling in?
-
1) TRANSFERRING CALLS INTERNALLY
When a user wants to transfer blind to his boss he can only do so by hitting transfer and then entering extension and hitting blind, in this case the boss will see the actual number of the person calling but the employee will not be able to tell him who is on the phone.
I have feedback from a number of clients that find this frustrating because although they want their secretary to screen the calls, if the emplyee does NOT hit blind (because she wants to check with boss first if he wants to talk to the caller) then once she transfers all he sees are a bunch of calls from her so when he is handling multiple calls he has no idea which is which, this may be a polycom limitation but any way to get around this now or maybe in 4.0?
I'm a little confused as to what your clients are requesting of you. With Polycoms you can do the normal two transfers: consultative (attended) or blind (unattended). You described that when the receptionist performs a consultative transfer to the boss, boss sees a bunch of calls while already active on a call and that boss can't navigate the new incoming call (the receptionist's consultation) with his current call. Each call should have at least numerical CID if not full CID. What series of Polycoms are in use? I know that the 500 series and 600 series offer a wide screen so you can view and navigate calls easily.
I guess I'm trying to figure out what you're looking for the PBX or Polycom to do to ease multiple call handling. I'm going to take a shot in the dark, but this boss, did he come from a Key System environment?
-
I was looking to see if there was an appropriate place for discussion in relation to ATA's like: Linksys SPA8000, Linksys PAP2, Linksys SPA2102, Audiocodes MP20x, etc. . I deal a lot with these types of device and I haven't seen a subforum for them. Is there a current preferred location for this, or if not could there be one created?
-
I've used Wavepad for all our IVR editing, excellent tool
i wish i can find a tool to replace the expensive voice talents
If you don't mind which version of WavePad do you utilize? Also if you don't mind me asking, are you onsite installations, or a hosted setup like myself? The reason I ask is that our customers are wanting unique MoH's, but of course all that streaming from our core PBX out to the clients can be taxing to the system and network. If your a hosted system how do you go about the MoH?
-
Excellent, thanks pbxuser911. I've made the adjustments and will be implementing them today. I can't believe I overlooked the cccit u-law formats, it's the same format the Broadsoft uses for their MoH as well.
-
We've tried a work around with the General Mailbox Delivery. For a domain that's using Polycom handsets. We auto provisioned the accounts out initially, and after the phones registered up and fully booted we manually registered the "Line 2" of each phone to an Account with no call routing and only acts a voice mail box. We allowed the account to have multiple registrations and it sends the MWI out to the handset since they are tied to the account.
This has seemed to work out so far except when they try to make an additional call sometimes they activate the "Line 2" or voice mail account instead of their own account.
with a notice of potential fraud 
.
Polycom DND disble?
in Polycom Phones
Posted
I was curious to know if anyone has had the request or have disabled the DND button on a Polycom handset. I have a client that has several 550's and their employees keep pressing the DND button; on accident or on purpose unknown. They've requested that we disable this feature which I think can be done on the PBX, but also I wanted to check if it can be done on the Handset.