SnomOne Plus FXO install

[andrewgroup]

OK,

I have an admission in that I simply don't read as much as needed prior to new products and doing so, wasting some time.

 

Some years ago a product came with a sheet that said "If you don't read manuals and quick start guides at leasr read this!"

 

Based on this FXO installation I would begin with the following tips.

 

1. Assume this system is not 100% configured from the box.

2. (If you do not successfully configure the Sangoma FXO board, the GATEWAY will not start) HINT, HINT, HINT See hint 4

3. Don't use Internet Explorer 8.0, (The Sangoma config web pages don't display)

4. You must perform the Sangoma Configuration "Quick Wizard" Note Expand your web browser, the Next button is in the far lower right Corner.

5. Always performline calibration tests. (this improves the echo cancellation and CPC signal handling)

 

I also think an adendum about the Sangoma card and all associated utilities would be a big plus with each unit.

 

Things I don't like. If you choose to wall mount the Chassis with the enclosed brackets, you are forced to removed it from the wall if you wish to remove the cover. (It would be nice if the chassis stayed.)

 

I hope this helps someone

[Steve B]

OK,

I have an admission in that I simply don't read as much as needed prior to new products and doing so, wasting some time.

 

Some years ago a product came with a sheet that said "If you don't read manuals and quick start guides at leasr read this!"

 

Based on this FXO installation I would begin with the following tips.

 

1. Assume this system is not 100% configured from the box.

2. (If you do not successfully configure the Sangoma FXO board, the GATEWAY will not start) HINT, HINT, HINT See hint 4

3. Don't use Internet Explorer 8.0, (The Sangoma config web pages don't display)

4. You must perform the Sangoma Configuration "Quick Wizard" Note Expand your web browser, the Next button is in the far lower right Corner.

5. Always performline calibration tests. (this improves the echo cancellation and CPC signal handling)

 

I also think an adendum about the Sangoma card and all associated utilities would be a big plus with each unit.

 

Things I don't like. If you choose to wall mount the Chassis with the enclosed brackets, you are forced to removed it from the wall if you wish to remove the cover. (It would be nice if the chassis stayed.)

 

I hope this helps someone

Thank you, I am looking to purchase one for a new customer and that will help a lot!