idd1717 Posted October 2, 2011 Report Share Posted October 2, 2011 When I have Snom One Free installed on my Mac (dynamic ip), how do i test call my pbx? I have a calling card trunk created, how do i route all incoming calls to an external termination server for making outbound calls please? And how do I add prefix to be automatically added to the numbers then called (from the destination server)? Where in Snom One can I implement iax2 trunk script somewhat like: sip.conf ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [James] type=friend host=xx.xxx.xxx.xx (allowed ip) port=5060 nat=yes qualify=yes disallow=all allow=g729 allow=ulaw allow=g723 context=James canreinvite=yes [James-dialout] type=friend host=xx.xxx.xxx.xxx (external server ip, for making outbound calls) port=5060 nat=yes qualify=yes disallow=all allow=g729 ;allow=ulaw ;allow=g723 context=James canreinvite=yes ;;;;;;;;;;;;;;;;;;; extensions.conf ;;;;;;;;;;;;;;;;;;;;; [James] exten => _xxxxxxxx,1,Answer() exten => _xxxxxxxx,n,NoOp(CLI:${CALLERID(num)}) exten => _xxxxxxxx,n,DISA(no-password,disa_test) [disa_test] exten => _X.,1,Dial(SIP/0011103${EXTEN}@James-dialout) (xxxxxxxx = did number)[/b] Many Thanks Quote Link to comment Share on other sites More sharing options...
Vodia support Posted October 3, 2011 Report Share Posted October 3, 2011 Do you have any extension registered to the system ? Can you call into your mailbox by the dialing the extension number? That would be the 1st step. If you're trying to use the Calling card account to call an external source you can use a DID and mapped it to the calling card account. The link below works the same way for extensions and accounts on the system. http://wiki.snomone.com/index.php?title=Extension_Accounts#Creating_a_Few_New_Extensions Refer to these article on calling cards Calling card http://kiwi.pbxnsip.com/index.php/Calling_Card Section on dial plan prefix. http://wiki.snomone.com/index.php?title=Dial_Plan_Samples#Dial_Plan_with_Prefix_in_Front_of_the_Number On your last question, it sounds like you want to create a link to another server, according to "iax2" implementation. check this article on "Connecting Branch Offices Together" http://wiki.snomone.com/index.php?title=Branch_Offices Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.