I´m a newbie to snomONE, came over from Mitel System. For a customer project I´ve configured a snomOne PBx and I´m absolutly thrilled about the system.
My problem points out here:
I´m not familiar to the Patton SN 4554. Also trying to configure the Patton with the Configuration Tool (June 2011) bring´s not much effect.
Searching for guides etc brought not much effect. Need to know how to set up connection between snomONE and Patton GW (SIP GW? SIP Registration? etc.).
System information
EuroISDN PP 2x S0
Snom One IP 192.168.168.245/24
DNS IP 192.168.168.250/24
Gateway IP 192.168.168.254/24
Patton IP 192.168.168.246/24
Created this configuration file with the tool:
####################################################################################
# Configuration file for SmartNode with: 0 FXO and 0 FXS
# With one ethernet port
# Configuration file name is tretwerk
# Snome One IPPBX
####################################################################################
# LAN Interface Data
# IP Address 192.168.168.246
# IP Mask 255.255.255.0
####################################################################################
# WAN Interface Data
# IP Address dhcp
# IP Mask
####################################################################################
# Default Gateway 192.168.168.254
####################################################################################
# IP-PBX/SIP PROXY DATA
# IP-PBX Ip Address / Name / Domain 192.168.168.245
# IP-PBX SIP Port 5060
####################################################################################
# LOCALIZATION DATA
# Country Germany
####################################################################################
# Supported firmware versions R5.x
# Tool version V2_1 06222011
# Adapted: Ernesto Casas
# for comments, feedback or suggestions please send an email to: ecasas@patton.com
####################################################################################
####################################################################################
webserver port 80 language en
sntp-client server 192.53.103.108
dns-client server 192.168.168.250
system
ic voice 0
low-bitrate-codec g729
profile ppp default
# Call Progress tones based on country selection. Your selected country is: Germany
profile call-progress-tone defaultDialtone
flush-play-list
play 1 1000 425 0
profile call-progress-tone defaultAlertingtone
flush-play-list
play 1 1000 425 -7
pause 2 4000 profile call-progress-tone defaultBusytone
flush-play-list
play 1 480 425 -7
pause 2 480
profile call-progress-tone defaultReleasetone
flush-play-list
play 1 240 425 -7
pause 2 240
profile call-progress-tone defaultCongestiontone
flush-play-list
play 1 240 425 -7
pause 2 240
profile tone-set default
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
fax transmission 1 relay t38-udp
fax transmission 2 bypass g711alaw64k
profile pstn default
profile sip default
profile aaa default
method 1 local
method 2 none
context ip router
interface IF_IP_LAN
ipaddress 192.168.168.246 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
interface IF_IP_WAN
ipaddress dhcp
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context ip router
route 0.0.0.0 0.0.0.0 192.168.168.254
context cs switch
digit-collection timeout 2
service hunt-group HUNT_FXO
cyclic
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
context cs switch
no shutdown
context sip-gateway GW_SIP_ALL_LINES
interface LAN
bind interface IF_IP_LAN context router port 5060
context sip-gateway GW_SIP_ALL_LINES
no shutdown
port ethernet 0 0
medium auto
encapsulation ip
bind interface IF_IP_LAN router
no shutdown
################################################# END ##################################################
#########
Need to know how to set up the connection between snomONE and Patton and If the configuration is ok or If there are mistakes included. How to setup the connection to the PBx, where to create the accounts to log in?
Thanks to all for help
