Marc-Andre Dufault

Both log's are set to 9 with all sip logging set to yes. Did the call and searched the log for evaluating without results.

The call gets connected to the number i dialed but on the phone display it shows the extension number and name. I am using snom one blue, doing plug and play with key system emulation. There is no dial plan on the phone. I have looked at the log and nothing about Dialplan: Evaluating xxx against xxx. I have noticed something whan looking at the log. MESSAGE sip:228@192.168.1.109:3316;transport=tls;line=ttrp6pb3 SIP/2.0 Via: SIP/2.0/TLS 192.168.1.12:5061;branch=z9hG4bK-44ddda924428c08743bf4ea3e593432f;rport From: "Malo Jocelyne" <sip:228@localhost>;tag=27963 To: "Malo Jocelyne" <sip:228@localhost> Call-ID: jqpkkmgm@pbx CSeq: 54455 MESSAGE Max-Forwards: 70 Contact: <sip:192.168.1.12:5061;transport=tls> Subject: buttons Content-Type: application/x-buttons Content-Length: 28 k=10 c=on l=5149822323 End of the log. Last line is l=5149822323 This is the number i have dialed for a test, it contains 223, one of my extention number. This part of the log repeats for all of my extentions with the same l=5149822323. It looks strange to me as i have dialed the number from extention 228. I think the pbx should not send info from the call i am doing to other extentions. Marc-Andre

100;Sangoma;;511;9511 101;Sangoma;;911;9911 102;Sangoma;;411;9411 103;Sangoma;;311;9311 104;Sangoma;;310*;9310* 105;Sangoma;;811;9811 150;MTO;;*;* 155;Sangoma;;*;9*

Hello, I did this setup last month and it works well. Download the snom one admin guide and follow the instructions in it. They are a lot more clear than in the wiki and easy to follow. Marc-Andre

Hello, Just found a bug. I am dialing an external number that contains the 3 digits of an extension in the domain. Exemple: 514-982-2424 and i have the extension 224 in the domain. the 514-982-2424 contains the 224 sequence. Tha call is connecting corectly but on the snom 320 display it shows the extention 224 and the user name. This is a nice one !! Runing snom one blue ver: 2011-4.2.0.3966 (Win32) Any one got this before ? Marc-Andre

Even if i compress the file it ise too big, i have quota of 500k and the file is 1.5 meg ! Marc-Andre

Hello, I was doing training on a new system yesterday and find a problem with the wac. When receiving calls from either direct from the trunk or from an AA the call transfer is going fine. When receving a call from the hunt group and trying to transfer the call, it is doing something strange, the incoming call is getting disconnected and 2 extensions are connected together. Did someone experienced this before ? Marc-Andre

I have tested it with eyebeam last night and i still have the problem. Like i posted before i did received an e-mail (only once) regarding the pbx will try next step in the dial plan. Marc-Andre

I did all that, I have set the pbx to send me an e-mail on errors. Here is a copy Dulude Taylor: Call attempt failed on trunk MTO@localhost PBX will try to reroute the call to sip:5149669052@192.168.1.12 using the dialplan. But it still not using the next entry in the dial plan. I have attached a copy of my dialplan. Marc-Andre Domain Administration MTL.htm

I am using a sip gateway as my main trunk but i also added a sangoma board for emergency calls and other local services. The sangoma trunk is fine dialing 411 or others. On a normal call my dial plan looks for 911, 411 ....etc, after will look for * and use my sip gateway to dial out. I have enabled failover on my sip gateway trunk and tested it by disconnecting ethernet cable. I am receving a 408 error and the pbx will not try to use the sangoma trunk to dial out. Configuration info: Snom one blue ver.4.2.0.3958 12 co lines on sip gateway trunk and doing key system emulation failover timeout is set to 20 for now but tested it with different values. Am i doing something wrong ? Can you please help Marc-Andre

I just did an upgrade to snom one blue and the problem is still there, do you have the fix for snom one, windows xp 32 bits ? Txs

I am using windows xp 32 bit Txs Marc-Andre

I have also noticed that led is flashing when a call is comming in from the trunk until it is picked-up by the AA or a member of the hunt group. Marc-Andre

Hello all Running pbxnsip version 4.2.0.3958 Snom 320 version 8.4.18 Plug and play enabled The mwi led does not light up when messages are in the voicemail box. I have 18 phones and all are doing the same. The send mwi is enabled in the voice mail box config in the pbx. Anyone had this issue ?

I am getting the same problem. Only on outgoing calls and the request timeout was appening after 3 minutes. In the call log there is no duration on all outgoing calls. I have restarted the cs410 after changing a setting for call end detection and suddenly the duration on outgoing calls is there and able to place calls for longer than 3 minutes. Will follow up if the problem append again.